How-to: register and combine xhorse VVDI BEE key tool lite with Xhorse App.
Connect key tool lite with mobile phone via main test cable
Download and run Xhorse App
Go to KeyTool Lite interface
Press “Connect” icon
Start to Set
Send security code to your mobile phone
Press Skip
Press Combine Device
Combine device successfully.
Now your VVDI BE key tool lite is ready to use.
How to program a key for a 2014 Volkswagen Golf using the Xhorse VVDI Key tool Plus programming tablet via OBD.
Select IMMO Prog->VW->Automactical diagnose vehicle
Key tool plus detected cluster type: VDO/Continental NEC35XX MQB 2014- UDS
Select Key Adding automatic wizard
Follow 5 steps to program key
1. Read and save eeprom data
2. Read and save immo data, this data is used to generate dealer key and learn key
3. Reset the instrument, clear DTC and sync the instrument
4. Generate dealer key, generate normal dealer key OEM (online)
5. Learn key.
Press Start to Read eeprom data
Then read and save immo data
Reset instrument
Generate dealer key
Turn on ignition with working key, if car has keyless, insert key nearby the ignition coil
Select Prepare normal dealer key->Add key (have a normal working key)
Insert original key into key tool plus
Save sync data
Upload immo data to generate dealer key
Input a new key into vvdi key tool plus
Prepare dealer key success.
Perform step 5 learn key.
Input number of keys to be learnt: 2
All key must be learnt.
All keys successfully learned.
Problem:
Volvo xc90 when i try to clone id48 96bit with xhorse vvdi mini key tool, i have this and can not read other 7. What is problem, server, tools or?
Solution:
Wait 1 minute each or disconnect battery terminal. Like VW Jetta, disconnect battery between reconnect and sniffer data acquisition 8 times.
You have to disconnect the battery each time.
After every read; ignition off, battery terminal off, wait 5 seconds, battery terminal on, ignition on.
Then it will work.
Read instructions on xhorse app.
If it’s Volvo model, each time can collect 1 set data, require disconnecting power to collect next set data.
Some people try turn the ignition off and On 8 times, without disconnecting battery, works ok as well.
Feedback:
i done I need to wait 2min new on each reading.
BMW F32 2016 all keys lost is done by xhorse vvdi key tool plus.
Put the wires directly to the ecu (EDC17C50) and you can read ISN on bench without removing it from the car entirely.
Procedure:
Disconnect battery negative clamp, remove fem/bdc, remove engine ecu.
1. Reading isn, use bosch ecu adapter and multi-function converter cable
If you want to add a key, just take out the fem and follow step 2-4. In step 4, use a working write key.
for example, add key to BMW F30
How-to: program Nissan Almera 2003 BCM key with xhorse vvdi tools.
Step 1: Read BCM by xhorse vvdi prog
Upload dump to xhorse cloud server
You can find nissan bcm almera 2003 imo data in My data
Step 2: Clone transponder with vvdi key tool max via super chip xt27a
Clone 93c66 transponder with key tool max
Prepare dealer key success. Save key file.
www.vvdishop.com