Problem:
I received a new key Xhorse XEDS01EN (purple packaging). They’ve updated the electronic board and when I program in Peugeot/Citroen the chip is programmed correctly but the control doesn’t work
I used key tool max pro and key tool max mini. Anybody have solution?
Solution:
1. Start the car first, then remove the key and wait for 1 minute. Then, turn on the instrument panel and press the remote lock button for 10 seconds. Then, remove the key and wait for another 1 minute. Press the remote control to unlock and lock until the central control is activated.
2. Wait for new App update.
Xhorse vvdi key tool plus has released a new App version, did a Citroën C3 yesterday, works perfectly.
Key tool max and max pro update coming soon.
3.
Or use you can use xn series remotes, because the Xhorse company changed the software for Peugeot or Citroen.
This is a frequently asked question of Xhorse keys. People say that no one can do Autel ikey and Xhorse either.
Here is the clue.
You can generate a xhorse proximity with 902Mhz profile (image below).
It works, just generation and test frequency.
People have made a lot of these on the Xhorse universal proximity type.
The remote worked, lock, unlock works.
The remote start worked. But to starts the vehicle, only when the key in the slot.
The proximity function won’t work.
Problem:
I am trying to clone 2016 VW Passat I have points but am getting this error with the xhorse vvdi key tool max.
Error: 5000, please use the binding account of the current device for 48(96 bit) Calculation.
Solution:
You have to link your xhorse key tool with your existing Xhorse account.
You have to log in with the server.
Go to your account page and bind the device. Takes no time at all.
Go to Device Information->Combine Device.
Problem solved.
Xhorse VVDI PROG + VVDI2 is able to read & decrypt 2016 Volkswagen Polo MQB locked D70F35xx immo data on bench. Need to activate VAG MQB48 License and disassemble MQB module from vehicle for pin lifting.
Following are the quick steps.
Step1. Read Data via VVDI PROG
Lift FVDD PIN from PCB according wiring diagram
Connect MQB board to VVDI PROG for reading.
Save the immo data file.
Step2. Decrypt Locked Data via VVDI2
Connect MQB board to VVDI2.
VW >> Key Learn >> MQB platform instrument immobilizer >> instrument with locked NEC35xx(MQB48, VDO/JCI) >> Load file >> Decode immodata >> Yes >> Selected immo data file read by VVDI PROG
Server calculating, please wait…
Press “OK” to save immo data file.
As we can see, immo data like VIN, CS, PIN, MAC & keys have been read out. It’s unlocked now and can be used for key adding or all keys lost.
Problem:
I was trying to clone a Ford key because their key was busted up so they can get it in and do a couple of new keys. But for some reason my xhorse vvdi key tool max wouldn’t clone them it’s done it before I just updated is it something in the new updates that should be fixed. This was on a 2008 F-150 You can see the information I pulled and The answer I got from the machine.
Solution:
83 chip ford not possible to clone.
80bit chip, This specific key can’t be cloned. Has to be generated
You can generate a 83 chip ford with vvdi super chip with vvdi and go to the car and program it with tool via obd2 is a simple process it won’t ask for pincode just go open ignition with new unprogramed key and add a key.