How to Use Dolphin XP007 to cut Honda Laser Key?

Topic: how to cut laser key (Honda key) using Xhorse Dolphin XP007 key cutting machine successfully.

Prepare:

Xhorse Dolphin XP007 with clamp installed

The original Honda laser key

One new key

EIS

Insert the original Honda laser key into the right of clamp, calibrate it and fasten it.

Insert the new Honda laser key into the left of clamp, calibrate it and fasten it.

Turn on Dolphin XP007, point the probe at the new key and start cutting.

Clean the fixture.

Take the new key and start cutting another side.

Cutting complete.

Clean the fixture again.

Insert the new laser key into the EIS to test if it can work.

Done.

Youtube video demo:

Xhorse Dolphin XP007 tech support from www.vvdishop.com

http://www.vvdishop.com/service/dolphin-xp007-cut-laser-key.html

How to Change Battery for Xhorse Dolphin XP005?

Topic: how to replace the old battery with the new one of Xhorse Dolphin XP005 key cutting machine.

PS: usually, the battery life is long enough that the user doesn’t need to replace it.

Look at the new battery of Xhorse Dolphin XP005 cutting machine.

Prepare:

One screwdriver

Procedure:

1. Lay the machine, face its base.

2. Use a screwdriver to loosen its screws and feet.

You will see the black box, that’s battery which is connected to the machine with 3 wires.

3. Unscrew all 8 screws on the two sides.

4. Remove the 4 screws on both sides of the battery.

Unplug the 3 wires to the battery.

5. The old battery is removed, ready to replace the new battery.

Please do from step 4 to step 1.

Xhorse Dolphin XP005 cutting machine tech support is supplied by www.vvdishop.com

http://www.vvdishop.com/service/replace-xhorse-dolphin-xp005-battery.html

BMW F30 95128 eeprom data lost solution

Question:

BMW f30 after desoldering 95128 eeprom all data lost {maybe overheated }
in new eprom I wrote data from another FEM but car now starts only from emergency coil { remote did not works}
I tried to write many dumps from another fem . update FEM with ISTA , but remote still not works
is there any possibility to restore data ?
what if I add new key ? remote will works on new key ?
OR I NEED TO BUY NEW FEM ?

Chief engineer replied:

1. New fem or used fem with keys and adapt. Ori eeprom and keyless wont restore

2. Program new key for this FEM then the car start it should start by keyless, or use the same FEM renew it and adapt it by AVDI

Final Solution:

SOLUTION for “professional” DRUGOWAZ
NO NEED TO BUY ANY NEW FEM !!!!!!!!!
find any 95128 dump from forum make all programming fem with Xhorse vvdi2. 
restore coding
now in car key must start only from emergency coil
next
at first read isn by vvdi from working key
erase key with vvdi
disassemble key
renew key by vvdi key tool or vvdi prog 
program “old” -new key with vvdi2
AND ALL !!!!
maybe all that can do with BMW explorer or autohex or anything else
Any other solutions?

I have done many FEM replacements from used modules, DME/DDE CAS ect ect. And to be honest on a scale of complexity this is a very straight forward job just need the right tools. For some it will make no sense to invest in these tools and so a new FEM will suit them fine. Even professionals buy and fit new parts!

Good luck!

So, which solution is suitable for you?

www.vvdishop.com

VVDI Mini Key Tool adds IC ID Card Clone

Xhorse VVDI Mini Key Tool remote maker released new firmware version V1.1.9.

MINI KEY TOOL Firmware V1.1.9

1.Add Access Card Clone (APP->Special Function->IC/ID Clone)

2. Add BMW HUF5767 Renew

3. Bug Fixed

Xhorse VVDI Key Tool Max what is new

VVDI key tool Max is available on vvdishop.com now. Compare with vvdi mini key tool, it has as the same function as keytool but has more obd function and has all build in, easy , fast and cheap and make life easier.

Look at vvdi key tool Max:

Price:

VVDI Key Tool Max: 299usd

VVDI Mini OBD: 199USD

VVDI Key Max+ MINI OBD: 498USD

Cars support list:

Question: what vehicle’s are supported under immobilizer function via OBD adding key.?

Answer:  most of general cars (not including BMW & Benz. For BMW and Benz, go for VVDI2 and VVDI MB), as usual we will update list week after week.

vvdi key tool Max capabilities:

-> OBD matching transponder/remote/smart card (vvdi mini key tool doesn’t support)

Question: What obd applications the new tool brings?

Answer: obd key programming

->Support Smart card remote, super remote, Super Chip XT27A66

->Generate transponder

->Transponder Clone

->Generate Remote

->Remote Clone

->Be connected to Dolphin XP-005 cutting machine via Bluetooth to cut the key

->Enter the car directly using KEY TOOL MAX+MINI OBD for matching. The entire process can be seamlessly connected without switching devices.

->Match the chip remote control for a wide range of car makes worldwide.

->Toyota H chip will be released first.

More functions will be coming soon.

www.vvdishop.com