Xhorse VVDI BIMTool pro will read the ISN for the following BMW ECUs:
Here are the bench pinouts of these ECUs
BMW EDC17C50 Fxx(TC1797) pinout
BMW 1 SERIES (F20) EDC17CP49 (TC1797) 2015
BMW ECU EDC17C45 (TC1797)
BMW ECU EDC17C56 (TC1797)
ECU BOSCH N20 TC1797
MEVD17.2.4_Exx, MEVD17.2.4_Fxx, MEVD17.2.9_Exx, MEVD17.2.9_Fxx, MEVD17.2.P_Fxx
ECU BOSCH N55 TC1797
MEVD17.2.6, MEVD17.2.G, MEVD17.2._Fxx
ECU BOSCH TC1793 MEVD17.2.3
BMW 3 Series F30 EDC17C76 TC1793 2011
Problem:
How to charge the battery of the xhorse dolphin xp005, I just bought it and it came without a charge and the connector light does not come on nor does the battery level go up?
Solution:
Once the charger is connected and turned on, the battery should flash. When turned off, the machine does not have any indicators. Leave it connected for a few hours and when you turn it on it should raise the lines inside the battery.
Make sure it is securely connected to the machine. Make sure the fuse near the connector is not damaged.
Update dolphin xp005 from a PC with xhorse upgrade kit. Some update it and everything work fine.
If still not working, the battery is probably bad. Contact your Tech support to send me a new battery. Replace it everything works again.
Problem:
I changed the xhorse condor mini plus date but it goes back the next day. How to fix it?
Solution:
The button battery on the motherboard is dead. Remove the case and replace the CR1220 battery on the motherboard.
The method can be applied to Xhorse Condor key cutting machines with serial number KM02, KM03 and KM05.
This is demo on using Xhorse VVDI BIMTool Pro + GODIAG BMW FEM/BDC Test Platform to generate a new BMW FEM key on bench. With GODIAG, we can easily to know if the FEM module and key are normal.
Connect GODIAG Test Platform to FEM module, VVDI BMW Tool& computer.
Plug in the power cord to start BMW Tool software.
FEM/BDC Key Learn >> Get Key Info >> Select a blank key position:Key 4 >> Prepare dealer key with ignition switch >> Have a working key, switch ON ignition with working key and continue
If you have the original key, click “Next”.
Insert working key into GODIAG Test Platform, click “OK”.
Click “OK” to save key data file.
Please input a new key info GODIAG Test Platform.
(The new key was generated and not locked.)
Click “OK”.
Key learn success.
Press start button on GODIAG, the key can light up the analog dashboard.
Let’s read the key again, it says locked. That means the key generation is successful.
User feedback: Programming BMW F15 2015 key with xhorse vvdi key tool plus successfully.
All ok with OBD only 2 min.
F15 is BDC not FEM( FEM not supported) and is supported by vvdi tools. Key tool plus can unlock BDC by obd.
add key and all keys lost both work by OBD
both keys in pics are aftermarket.