How to Add BMW CAS2 CAS3 Key with Xhorse Key Tool Plus on Bench?

 New test report: program a new spare key to BMW E60 CAS2 with xhorse vvdi key tool plus on bench successfully.

how to connect the cables? What is the diagram?

Easy here have diagram for connecting Cas2 cas3 cas3++ (not for istap) and read directly and add new key without soldering wire with CAS. Same protocol for CAS3.

 http://blog.vvdishop.com/vvdi2-vvdi-bimtool-works-with-xhorse-cas-plug/

Why don’t just add a key by OBD?  Because this is sent CAS and old with dpd.

Read & Write MOTO HC11 Series Chips read Xhorse VVDI Prog

 The answer is yes. To successfully read old Motorola HC11 series chips, ETL programmer was a must before. But now, it’s difficult to find one on market. This may cause trouble when reading old Land Rover with HC11 chips. Fortunately, after engineer’s correction and upgrade, Xhorse VVDI PROG is able to read & write HC11 series chips!

How to read MOTO HC11 chips with VVDI PROG?

1. Check out the standard code via bitmask on CPU.

For example, the bitmask on CPU is 0G10V. We can get its standard code MC68HC11P2 via MOTO Bitmask List.

2. Select correct options in VVDI PROG Such as

Brand: Motorola MC68HC(7)11 Series

Chip: MC68HC11P2

3. Need to remove CPU from circuit board to solder with MCU Reflash Cable. It’s possible to use an appropriate adapter as well if having.

This function can help locksmiths to solve data reading & writing problems for some old cars. No more to buy additional programmers.

www.vvdishop.com

Will Xhorse VVDI Mini Key Tool Clone Skoda MQB Key?

 Question:

I am looking to buy the xhorse vvdi mini key tool, but before I pull the trigger I need to know if this thing will work with the car. I have Seat Leon MK3 2014 BCM MQBAB M H14 with only one key which I believe is not original. Will I be able to add/clone the key with this tool and if so which key should I get?

Answer and Solution:

MQB can not be cloned at all.

Xhorse mini keytool can clone immobilizers but id49/48 Mqb cannot be cloned. You can generate an appropriate key model but you have to add it after obd. Lonsdor, autel, smart pro, obd star can do it.

This can be programmed, first you need to order a blank mqb and with Xhorse to generate the exact model on mqb after that with autel Londsor etc you can make it.

Xhorse MQB smart remote

Xhorse MQB super remote

Can Xhorse VVDI2 Read BMW MSD80 ISN from DME?

 Can xhorse vvdi2 read ISN from a BMW MSD80 DME?  This is a frequently asked question by users.

Yes, it can.

Here’s the guide on reading MSD80 ISN with vvdi2.

Check msd80 vvdi2 wiring diagram

set up bench connection with vvdi2 and ecu, provide 13.5V power supply

Let’s go to BMW
Go to Key Learn function- ECU/CAS ISN-MSD80
Read ECU ISN

if you don’t want to mess with bmw, you gonna wait patiently

vvdi2 bmw reads the engine ISN and VIN, read full flashing completed.

Save data.

Change MSD80 VIN requires complete flashing. If vvdi2 will read complete flashing, it can change the vin.

https://www.vvdishop.com/service/read-bmw-msd80-isn-with-xhorse-vvdi2.html

Xhorse Toyota XM38 Smart Key Calculate Failed?

 Question:

I try to generate Toyota Camry 8A proximity (P4 A9) with the new Xhorse XM38 smart key and key tool max. It failed me. Anyone can help me with the calculation failed error code 9B?

Solution:

The error means your XM38 proximity cannot match your device version.

You properly got the Chinese version XM38 key but your device is the Global version.

Do choose the global version XM38 smart key (English) here

https://www.vvdishop.com/wholesale/xhorse-xsto01en-toyota-xm38-smart-key.html