ابزار Xhorse VVDI
Xhose VVDI نرم افزار برنامه نویس اصلی و سخت افزارابزار Xhorse VVDI
Xhose VVDI نرم افزار برنامه نویس اصلی و سخت افزارVVDI key tool failed to calculate 4d70 solution
Post starts with VVDI KEY TOOL issues and followed with solution, and finally solved.
I’m having issues here.
I could not calculate on line 4d70 on line I tried and tried and tried. So I deleted the app and reinstalled it and cannot remember my username for the life of me. I have tried everything possible. So with the link above complaints I’m having issues again. I can’t send an email because I’m getting the below wrong ![<div class=]()
vvdi key tool
xhorse vvdi key tool
VVDI Key Tool copy Ford ID83 chip with Xhorse App
Xhorse app runs faster than old VVDI Key Tool App. The KeyTool registration procedure is the same as Mini Key Tool and Condor Dolphin.
Check here:
VVDI Key Tool 70/83 Online Calculation
Transponder Clone->70/83 Online Calculation
Put original key into Key Tool coil to recognize
Identified Ford ID83 transponder
Uploading to server
Query calculation result
Put new key into VVDI keytool and write data
Write key success
Ford ID83 transponder clone success.
Program Toyota Hilux 2014 Remote by VVDI Key Tool
How to use Xhorse VVDI Key Tool remote maker to program a new remote key on a Toyota Hilux 2014?
Vehicle: Toyota Hilux 2014 3.0 D-4D
Tools required:
Original key
Xhorse universal key Toyota type (3-button)
Procedure:
Insert xhorse remote key into keytool
In VVDI keytool, Select Remote/Smart Program->Remote Key->Asia->Toyota->Camry Thailand
Remote frequency 433MHz
Write key data
Write key success
Manually program remote control
Open and close driver door
Insert original key into ignition without start engine
Check the security indicator, it is off.
Turn ignition ON and Off for 5 times
The security indicator goes on
Open and close driver door
Turn ignition ON
Open and close driver door again
Turn ignition OFF and ON
Press LOCK and UNLOCK button of Xhorse remote key
Open and close driver door again
Program remote success
Test the remote control
Done.
http://blog.vvdishop.com/vvdi-key-tool-program-toyota-hilux-2014-remote-key/
Program Toyota Yaris 2009 Remote with VVDI Keytool
Tools required:
Original key
VVDI KEY Tool remote maker
A universal 3-button Toyota remote from Xhorse
Original key
Xhorse remote key
Procedure:
Select Remote/Smart Program->Remote Key->Asia->Toyota->Camry Thailand B44TA 433MHz
Insert xhorse remote key into coil
Press Gen button
Write key in process
VVDI Key tool program remote key succes
Then manually program remote control
Driver’s door open, key removed from ignition switch.
Within 5 seconds:
Insert and remove the key from the ignition switch twice.
Within 40 seconds:
Close and open driver’s door twice.
Insert and remove the key from the ignition switch.
Within 40 seconds:
Close and open driver’s door twice.
Insert the key into the ignition switch and close the driver’s door.
Switch ignition ON and OFF once to program a remote transmitter code whilst retaining the original codes or twice to program a remote transmitter code whilst erasing the original codes.
Remove key from ignition switch:
System should now lock and unlock vehicle once, twice or five times depending which mode has been selected. One to four times, slowly, to indicate number of remote transmitters registered.
Within 40 seconds:
Press and hold LOCK and UNLOCK remote buttons simultaneously for 1.5 seconds
Within 3 seconds:
Press LOCK button.
System should now lock and unlock vehicle once to confirm registration, twice to indicate registration has failed.
Within 40 seconds:
Repeat button procedure to program remaining remote transmitters.
NOTE: To exit programming mode: Open driver’s door. NOTE: A maximum of 4 remote transmitters can be programmed.
Within 5 seconds:
Insert and remove the key from the ignition switch twice.
Within 40 seconds:
Close and open driver’s door twice.
Insert and remove the key from the ignition switch.
Within 40 seconds:
Close and open driver’s door twice.
Insert the key into the ignition switch and close the driver’s door.
Switch ignition ON and OFF once to program a remote transmitter code whilst retaining the original codes or twice to program a remote transmitter code whilst erasing the original codes.
Remove key from ignition switch:
System should now lock and unlock vehicle once, twice or five times depending which mode has been selected. One to four times, slowly, to indicate number of remote transmitters registered.
Within 40 seconds:
Press and hold LOCK and UNLOCK remote buttons simultaneously for 1.5 seconds
Within 3 seconds:
Press LOCK button.
System should now lock and unlock vehicle once to confirm registration, twice to indicate registration has failed.
Within 40 seconds:
Repeat button procedure to program remaining remote transmitters.
NOTE: To exit programming mode: Open driver’s door. NOTE: A maximum of 4 remote transmitters can be programmed.
http://blog.vvdishop.com/vvdi-key-tool-program-toyota-yaris-2009-remote-key/
How to convert 4D60 chip to 4D70?
The 4D60 80bit Chip is 40DST by default if you detect with Xhorse VVDI Key Tool. After transfer, VVDI Key Tool will show it 4D 70 DST80.
4D60 chip
In VVDI KeyTool, select Transponder Clone->Automatic Detection Clone
Put 4D60 transponder into coil
VVDI Keytool identified chip information: 4D60 DST40
Select Special Functions -> ID63 <->ID83
With this function, you can transfer ID63 to ID83 or DST40 to DST80
Convert DST80 success
Now back to test the new chip
Now the chip is converted to 4D70 DST80.
http://www.vvdishop.com/service/how-to-transfer-4d60-dst40-chip-to-dst80-chip-by-vvdi-key-tool-9088.html