Tips to Check Car Mileage in VVDI Key Tool Max

 Here’s a small tip to guide you quickly check vehicle mileage on Xhorse VVDI Key Tool Max Pro/ VVDI Key Tool Max programmer. You’ll need to have a working key at hand.

Put the working key into Key Tool Max slot.

Transponder clone >> Read transponder

Here to check key information including key type, specific chip, key ID, key status, cloneable or not, encrypte mode, code mode, brand, chip type, programming status, frequency, kilometers(KM) and key number.

Slide down the screen to find KM, It shows 612754km.

That’s the vehicle mileage.

* It should be noted that the function does not apply to all cars.

Program Kia Rop 2018 4D Remote with Xhorse Key Tool

 Tips to clone Kia Rio 2018 year 433mhz, 4d dst80 remote with xhorse vvdi mini key tool/key tool max.

Proble resolved with xhorse super remote key.

First generate KIA RIO correct model and after this generate only transponder. Programmed with the car and all work fine.

As long as the remote is right, just clone transponder with super remote or wireless xhorse key… Then remote via obd. Transponder doesn’t need to be right if cloning key.

Unlock Nissan 4A Smart Remote with VVDI Key Tool

Unlocking Nissan proximity smart remote with vvdi key tool succeed.

Prox information:

Nissan AES 4A smart key A232800800 5BTN 433MHz

Wiring connection:

Renew prox succeed

VVDI mini key tool adds remote renew function as well. You need to use extra renew cable.

http://blog.vvdishop.com/renew-nissan-proximity-4a-with-vvdi-key-tool/

VVDI Remote Database V214 adds Honda ID47 KeylessGo

Xhorse VVDI Key Tool/ VVDI Key Tool Max remote/KeylessGo database V214 Update (2020-03-10)

KeylessGo:
+Add Honda Lead Moto KeylessGo ID47
+Add Honda Ablade Moto KeylessGo ID47
+Add Honda Vision Moto KeylessGo ID47
+Add Honda Vario Moto KeylessGo ID47
+Add Honda SH(2015-2016) Moto KeylessGo ID47
+Add Honda PCX (2015-2016) Moto KeylessGo ID47
+Add Honda SH (2017+) Moto KeylessGo ID47
+Add Honda SH300i (2017+) Moto KeylessGo ID47

Remote:
+Add Toyota 314.3 Australia etc

www.vvdishop.com

BMW F30 95128 eeprom data lost solution

Question:

BMW f30 after desoldering 95128 eeprom all data lost {maybe overheated }
in new eprom I wrote data from another FEM but car now starts only from emergency coil { remote did not works}
I tried to write many dumps from another fem . update FEM with ISTA , but remote still not works
is there any possibility to restore data ?
what if I add new key ? remote will works on new key ?
OR I NEED TO BUY NEW FEM ?

Chief engineer replied:

1. New fem or used fem with keys and adapt. Ori eeprom and keyless wont restore

2. Program new key for this FEM then the car start it should start by keyless, or use the same FEM renew it and adapt it by AVDI

Final Solution:

SOLUTION for “professional” DRUGOWAZ
NO NEED TO BUY ANY NEW FEM !!!!!!!!!
find any 95128 dump from forum make all programming fem with Xhorse vvdi2. 
restore coding
now in car key must start only from emergency coil
next
at first read isn by vvdi from working key
erase key with vvdi
disassemble key
renew key by vvdi key tool or vvdi prog 
program “old” -new key with vvdi2
AND ALL !!!!
maybe all that can do with BMW explorer or autohex or anything else
Any other solutions?

I have done many FEM replacements from used modules, DME/DDE CAS ect ect. And to be honest on a scale of complexity this is a very straight forward job just need the right tools. For some it will make no sense to invest in these tools and so a new FEM will suit them fine. Even professionals buy and fit new parts!

Good luck!

So, which solution is suitable for you?

www.vvdishop.com