Today I have a 2018-2019 Nissan Petrol key lock, and I’m going to cut a NSN14 key with Xhorse Dolphin XP005L Key Cutting Machine for the door. All keys were lost, so I should remove the lock from the side door to get its bitting codes.
Enter into key cutting interface:
Vehicle database >> Nissan >> All key blank >> NSN14 >> OK
As you can see, there are only 8 pins on the lock.
Input the bitting codes: 124223323, 124223323
Install a key blank on M5 clamp, tip align 4th position.
Press “Cut key >> Cut”.
Dolphin II will start cutting the key automatically…
Wait until processing finished.
Take out the new key for a try.
It can smoothly rotate the lock.
Successfully done.
Follow us for more Xhorse Key Cutting Machine updates.
Problem:
What seems to be the problem. I can’t prepare xhorse xm38 toyota smart key, key tool max gave me error calculate failed Error 9B. I tried with different wifi, and nothing changed! Any solution?
Solution:
Your remote is Chinese (CN) version. Error 9B means version of your device does not match that of the remote.
The Chinese packaging XM38s can’t be used outside of CHINA.
Do buy a Global version of XM38 remote.
BMW MSV80 ISN reading using Xhorse VVDI2 successfully. The process takes about ten minutes.
Connection diagram is on the right of the vvdi menu.
Pin 44 and 22 of the left connector
No need to connect resistors.
If vvdi2 failed to read MSV80 DME ISN, you need to open it and move some components.
You can also Add the components from another DME or new. You can leave them in or remove them after. Some hardware versions had both sets, some only had one.
Or try bosch cable with vvdi prog or vvdi key tool plus with BMW ISN license.
Here comes the customer feedback:
Programming spare to a North American 2015 RAV4 (8A keylessgo smart key), key immediately programs for all functions for remote and proximity, but trunk does not function on the xhorse xm38 smart key.
Generate key via this option.
RAV4(14-19) KeylessGo 8A 312.10-314.35
Problem with using Toyota Smart Key Settings for the smart access/smart start.
Use VVDI Smart Key Customization only, change Trunk setting to 0A, if you make the mistake of using Toyota Smart Key Customization, you need to regenerate the Toyota Smart Key protocol. Customize the Trunk button settings, erase keys from the vehicle and reprogram it. If not the remote function will be available but the proximity will not work.
Hope it helps.
User feedback: 2021 Toyota Hilux 2gd-ftv all keys lost is done. Chip H 8A. Use xhorse vvdi key tool max, mini obd tool and 8a control box cable (bundle kit).
This is a Hilux made in Thailand and sold in Latin America.
I have done American and Japanese Rav4, Tacoma, Prado, Corolla Fortuner.
With the new immobox with fewer pins it can’t be done yet.
clear with the normal box 8H 8A is simple with akl kit, the new immobox can only be done with TIS techstream.
Images attached.