Download and Install Toyota Techstream for Xhorse MVCI Pro

 Xhorse MVCI Pro J2534 cable is tested working fine with Toyota Techstream V18.00.008 software.

MVCI Pro does not have CD software. Contact www.vvdishop.com customer service to download Techstream v18 and patch.

How to use Xhorse MVCI Pro with Toyota Techstream?
Download Toyota Techstream V18.00.008

Install Techstream_Setup
Accept license agreement

Inter user name and company name randomly

Finish installing setup
Download and Install MVCI Pro J2534 driver

http://blog.vvdishop.com/free-download-xhorse-mvci-pro-j2534-driver-software/

Copy and paste Techstream Patch to desktop

Connect MVCI pro cable with laptop
Check device is connected in Device Manager

Run MVCI Pro driver
Detect device status

Make sure update driver software and firmware to latest version.

Right click to install Toyota driver

Software is ready to use
Run Techstream from desktop

How to Set up Honda HDS Software for Xhorse MVCI Pro?

 Xhorse MVCI Pro J2534 interface is tested working with Honda HDS diagnostic system software.  Here is the instruction on how to set up Honda HDS for MVCI pro.

Download Honda HDS V3.102.051

password: ntadgm

Download Honda HDS V3.104.024

password: hecsv3

*If don’t need newer 3.104 version, just install 3.102 version.

*If need to use 3.104 hds with mvci pro, you should install 3.102 first, then install 3.104.

Procedure:

Install HDS 3.102 setup
Press Next
Accept license agreement
Select region- Other region

Select country
Enter dealer code: 123456

Select setup language

Finish installing HDS 3.102 software

Install HDS 3.104.024 setup until finished.

Run Honda FIX patch to crack HDS

Download and Install MVCI Pro driver

Free Download Xhorse MVCI Pro J2534 Driver Software

Connect MVCI Pro j2534 cable with laptop

Check device is connected in Device Manager
Run MVCI Pro j2534on desktop

Check device connection status

Make sure update software and firmware to latest version

Install Honda driver in MVCI pro

Software is ready to use.

Run HDS software

www.vvdishop.com

VVDI Key Tool Plus Adds VW Vento 2016 MQB Key Success

 Successfully programmed Volkswagen Vento 2016 MQB48 smart key (add a spare key) using xhorse vvdi key tool plus.

in this model does not ask for sync data it is still 4th generation.
megamos MQB 48 chip.
requires License from mqb48.

MCU processor: Renesas A2C00889000

Read immo data method: lift pin

Read immo data you will get CS and PIN, generate dealer key and learn key.

Xhorse MVCI Pro Sync authorization 2 failed Solution

 Problem:

I got the xhorse mvci pro j2534 cable connected and try to update authorization, but failed, says error “Sync authorization 2 failed! Error code: ff02”

Solution:

[Read Authorization]:  You can read the current device authorization status and available times. (Note: When the number of available times is 0, the use of most functions will be limited)

[Update Authorization] You can update the latest authorization status of the device and reset the available times.

Users have to update both software and firmware to latest versions, then update authorization.

Xhorse MVCI Pro J2534 Driver Installation

Xhorse released a new MVCI Pro J2534 diagnostic cable for VAG ODIS, Toyota Techstream, Honda HDS, Subaru SSM4, Ford IDS, Mazda IDS etc.

Here vvdishop.com provides mvci pro j2534 driver download free.

download Xhorse mvci pro j2534 driver

https://mega.nz/file/MuoiBJZa#MjmQNzgll4pJEERnq1v__sHx6n3C9nr-cMwJqChNPAs

How to Install Xhorse MVCI Pro j2534 driver?

 

How to use Xhorse MVCI Pro J2534 cable?
1. Download J2534 compatible software
The device is compatible with original diagnostic software.
Xhorse does not provide software download, download software from 3rd party or original manufacturer’s website.

2. Download and install MVCI Pro J2534 software

 
3. Connect MVCI Pro cable with laptop and vehicle

Run MVCI Pro driver

Connect j2534 cable

Install car drivers you desired, current available drivers, VW, Honda, Toyota, Ford, Mazda and Subaru. Keep updating.

Check current latest mvci pro software and firmware version

Current software version: V1.0.3

Current firmware version V1.2.0

Both software and firmware version can be updated online.

Setting option

After install software, device driver you can run diagnosis.

https://www.vvdishop.com/service/install-xhorse-mvci-pro-j2534-driver.html