VVDI2 Program 2012 Audi Q5 All Keys Lost via OBD

How to: Program a 2012 Audi Q5 All Keys Lost using Xhorse VVDI2 VAG key programmer via OBD.

Step 1: Connect VVDI2 to car by OBD, start read BCM data

Open VVDI2 software, select Key Learn->5th Immobilizer System
(Supports Audi A4L/Q5/A5/A6L(2012-)/A7/A8(2011-)/VW Touareg(2011-)

Select Read BCM2 Data(OBDII)

If lost all working key, open the headlight, and step on the brake before continue.

Read key information

Disconnect BCM module from power fro 2-3 seconds and reconnect again.
Trying to reconnect to BCM…

Save BCM2 data.

Step 2. Verify key lock status with “Check key status”button

Step 3: Press “Prepare Dealer Key”, it requests load the BCM2 data read in step 1. Then out the programmable key into programmer.
Prepare the dealer key with tips.

Step 4: Connect VVDI2 with car, prepare all the key for this car. Insert one key into switch ignition, input
the key number you want to learn. Then press “Key learning”, it requests load the BCM2 data read in step 1.
Complete the key learning follow the tips.

All keys successfully learned.

http://www.vvdishop.com

http://www.vvdishop.com/service/program-2012-audi-q5-all-keys-lost-with-vvdi2-vag-8077.html

VVDI2 VAG Program Audi S5 2010 BCM2 Smart Key

How to: Program Smart Remote to a Audi S5 year 2010 5th generation immobilizer BCM2 with Xhorse VVDI2 key programmer.

Step 1:Read BCM2 data

Open VVDI2 software->Audi->Key Learn->5th Immobilizer system

Precedure to read BCM: choose Read by OBDII
Press Read BCM2 data (OBDII)

Insert working key into ignition and switch on before continue
If working key is already in car, take out and insret it again (also switch START/STOP button)
If lost all working keys, open the headlight, and step on the brake before continue
Disable security access level1 Success

VVDI2 read VAG number and key number

Save BCM2 data

Step 2: Check key status

Step 3: Make dealer key by BCM2 dump

Choose A4L A5 Q5 add key or lost all keys- Don’t need working key
Press Next

Press OK to load BCM2 data read from step 1

Put new key into VVDI2 VAG programmer,then continue
Start read key information, please wait

Now reprogramming key info, please wait

Start make key

Dealer key make successful

Step 4: Key Learning 

Connect with our VVDI2 device to vehicle, prepare all the key for this car. Insert one key into switch ignition,
input key number you want to learn.

Here 2 keys need to learn. Press Key Learning to continue.

Press OK to load BCM2 data read from step 1
Insert working key into igniton (or nearby ignition coil) and switch on beofre contonue.
If lost all working key, insert dealer key into ignition (or nearby ignition coil), open the headlight, and
step on the brake before continue.
Start learning key

Insert every key into ignition in turn
Once a key is learned successful, X/Y in the dashboard, X will be added 1.
If only have ignition coil, please stop and start the START/STOP button after X added 1.

1st key learned successful
Insert 2nd key to ignition switch and turn on

2nd key learned successful

All keys have been learned success

Test start ok

Test remote control ok

Done.

www.vvdishop.com

http://blog.vvdishop.com/xhorse-vvdi2-program-audi-s5-2010-bcm2-smart-remote-key/

VVDI2 Re-adapt Key Audi A7 keyless Go

As titled, here’s the test on re-adapting key on Audi A7 Keyless Go using  Xhorse VVDI2 VAG key programmer.

Insert working key into VVDI2

Open VVDI2 VAG software

Select Key Learn->5th Immobilizer system->Check key status

The current key has keyless. The key is locked.

Insert another key into VVDI2 key programmer, check key status again

The current key does not have keyless. The key is not locked.

Turn ignition switch to ON position

Read BCM2 Data (OBDII)

Insert working key into ignition and switch on before continue.
If working key is already in car, take out and insert in again (switch START/STOP button as well)
If lost all working key, open the headlight, and step on the brake before continue.

Transfer data

Save data

Connect VVDI2 with car,prepare all the key for this car.  Insert one key into switch ignition, input the key number you want to learn, Then press “Key Learning”, it requests load the BCM2 data read in step 1.

Insert every key into ignition in turn. Once a key is learned successful, X/Y in the dashboard, X will be added 1.
If only have ignition coil, please stop and start the START/STOP button after X added 1.

Insert working key into ignition or nearby ignition coil and switch on before continue.
If lost all working key, insert dealer key into ignition. Open the headlight, and step on the brake before continue

Start learning key

VVDI2 re-adapt Audi A7 keyless go success.

www.vvdishop.com

 http://blog.vvdishop.com/re-adapt-key-audi-a7-keyless-go-with-xhorse-vvdi2/

VVDI2 Change Odometer for Skoda Octavia 2015 MQB

Here’s an example of odometer (mileage) correction in the car Skoda Octavia 2015 (VAG MQB platform). The procedure is carried out with the Xhorse VVDI2 VAG key programmer.

Original mileage: 66,612KM

Open VVDI2 software

Select Key Learn->MQB platform instrument immobilizer->Instrument with NEC35xx (Continental/VDO)

Click on Diag to load vehicle information

Instrument version 2210

Instrument type: MQB NEC35xx Continental VDO

You can read eeprom and save it first.

Click on read KM

Read odometer success.

Manually enter odometer you desired

Click on Write KM

Switch ignition on with working key before press OK. If car has Keyless Go, put the working key nearly car coil and switch on.

Choose security login:  Login Method 2 (because software version of the dashboard belong to 2210)

Write data success.

Use “Reset instrument” to active instrument after all the operation is finished.

Reset success.

Check mileage on dashboard

Clear ABS fault codes with VVDI2 software

Done.

www.vvdishop.com

http://blog.vvdishop.com/vvdi2-change-mileage-on-skoda-octavia-2015-mqb-system/

VVDI2 VAG Program Skoda Octavia 2015 MQB Smart Key

Here’s an example of programming a smart key in the car Skoda Octavia 2015 (MQB platform VAG) using Xhorse VVDI2 VAG key programmer.

Open VVDI2 VAG software

Select Key Learn->MQB platform instrument immobilizer->Instrument with NEC35xx (Continental/VDO)

Click on Diag to load vehicle information

Instrument version 2210

Instrument type: MQB NEC35xx Continental VDO

Read EEPROM data and save

Switch on with working key before press ok

If car has keyless Go, put the working key nearby car coil and switch on

Choose Login Method 2, the car software for dashboard belong to 2210

Press Next to continue

1. The dashboard is dark when you see this tips. You need finish all operation before reset instrument.
2.Read EEPROM and save it.
3.Read IMMO data and save it.
4. Prepare a dealer key (You can go to step 7 if have working key aslo
don’t want to add key)
5. Reset instrument
6. Add key use immo data to learn the new dealer key to car
7. Finish other customer requests.

Save eeprom

Click on Read Immo data and then save it

Select Maker Dealer Key->Skoda

If prepare normal dealer key, follow instructions below:

Here we select Prepare OEM key

Prepare OEM key: need special key or OEM key. You must provide an original key ID to prepare OEM key. The OEM key can do online operation. OEM key can start engine directly for 4th immo system.
For 5th immo system need learn again.

Select key position 3

Press Next to continue

Input original working key to VVDI2 and press OK

Input OEM key to VVDI2 key programmer and continue.

Use “Reset instrument” to active instrument after all the operation is finished.

Click on Add key

Select Learn key, login with security code from immo data. Put the key into ignition switch on accord flowing tips. You must prepare all the working key.
Select key number to learn: 2
Press Next

Confirm car has keyless.

Put the dealer key nearby car ignition switch and switch ON dashboard before continue

First key learn succeed

Learn second key with VVDI2

Test the remote control and start car.

Success.

http://www.vvdishop.com/

http://blog.vvdishop.com/program-skoda-octavia-2015-mqb-keyless-go-with-xhorse-vvdi2/