How to Solve Xhorse VVDI Key Tool Plus Benz W164 EIS No Voltage

One customer gave feedback that his Xhorse VVDI Key Tool Plus Pad was not voltage when reading Mercedes-Benz W164 EIS on bench. He was using a XDKP30 Multi Function Adapter to connect Benz EZS/EIS Adapter and Key Tool Plus.

Is this the right connection? Please help.

Solution

1. Please check if the Cable Connection is all correct.
2. Please check if the Select Path is correct.

Vvdishop.com engineer shares the correct cable connection:

VVDI Key Tool Plus + XDKP30 Adapter + Benz EZS/EIS Adapter

* DO NOT connect to 12V voltage if the wiring diagram is not marked.

• Read Benz EIS on Bench

Select path:

Prog >> IMMO >> BENZ >> EIS

• Read Benz EIS on car(by OBD)

Select path:

Immo programming >> Benz >> Select from system >> EIS Tools

From the images provided, we found the customer had selected the wrong path for OBD method. Simply re-select to correct path, the problem can be solved!

Hope this is helpful.

What TPMS Sensor to use with VVDI Key Tool Max Pro

 Question:

Does anyone know exactly what tpm sensors xhorse vvdi Key tool max pro works with?

Answer:
OEM one works.
Autel MX-TPMS sensor tested working. But better use xhorse one.
Xhorse will soon release their own X-TPMS sensor.

Key Tool max pro free update TPMS features. Check here for detailed info.

How to Update TPMS Function to Xhorse VVDI Key Tool Max Pro?

Xhorse XTPMS sensor features:

• dual frequency 315MHz and 433Mhz
• Programmable
• 98% vehicle coverage.
• Long battery life: lasts a lifespan of 4-6 years.
• AG material: Use automotive-grade material and perform strict quality control
• Angle adjustable: meet different wheel hub installation needs

Parameter:

• Power: 5-8dBm
• Battery: 350mAh/3V
• Frequnecy: 315Mhz/433Mhz
• Tire pressure monitoring range: 0-800kPa
• Tire pressure monitoring accuracy: ±10kPa
• Temperature Monitoring Accuracy: ±5℃
• Size: 76.5×50.1×20.6mm
• Battery type: CR2050HR
• Battery manufacturer: MAXELL
• Battery capacity: 350mAh

www.vvdishop.com

Xhorse VVDI MB Tool Failed Error 3?

Problem:

My xhorse vvdi mb tool gave me failed error 3 when during data acquisition procedure. Error image attached. Any solution?

Here is the clue.

The SSID has successfully calculated the password in the last 12 hours. Use “Query result” function to get password and then write key.

www.vvdishop.com

How to Fix Xhorse Condor II Breaks Cutter Screen Dark

 Problem:

One customer gave feedback that Xhorse Condor XC MINI Plus II screen turned dark during operation. And He has broken lots of cutters when cutting, When it stops then movement on cutter stops while it moves it breaks cutter and have to change the cutter.

Possible Reasons:

1.Hard key blank and incorrect cutter setting (broken cutter)

2.Damaged driver board (dark screen)

Solution:

1.Set “Spindle Speed” as “High”, and set “Movement Speed” as “Low”.

2.Replace driver board.

Tips to Check Car Mileage in VVDI Key Tool Max

 Here’s a small tip to guide you quickly check vehicle mileage on Xhorse VVDI Key Tool Max Pro/ VVDI Key Tool Max programmer. You’ll need to have a working key at hand.

Put the working key into Key Tool Max slot.

Transponder clone >> Read transponder

Here to check key information including key type, specific chip, key ID, key status, cloneable or not, encrypte mode, code mode, brand, chip type, programming status, frequency, kilometers(KM) and key number.

Slide down the screen to find KM, It shows 612754km.

That’s the vehicle mileage.

* It should be noted that the function does not apply to all cars.