Xhorse Condor Cut Key Sprinter W906 2007-2011

 This is a demonstration of how to copy a Mercedes Benz Sprinter W906 2007-2011 Key by Xhorse Condor XC-Mini Plus key cutting machine.

Prepare a Mercedes original key & a blank key.

Go to Condor XC-Mini Plus touch screen,

Key duplication >> Mercedes >> Sprinter >> W906(2007-2011)

Select key type:

Key ID: 15011

Key Width: 550

Cute: 10

Cut Depth: 1.00mm

Confirm >> Key decode

Fix the original key flat on M2 clamp, press “Confirm” to start.

The Condor Mini Plus starts decoding…

Take out the original key and change to blank key instead when XC-Mini stopped.

Press “Cut” on screen.

XC-Mini machine starts cutting…

Wait until the machine finished.

Done!

Take out the new key to have a try, it is actually same as original one, it does work!

Mercedes Sprinter W906 key duplication cutting via Xhorse Condor XC-Mini Automatic Machine successfully!

Read Hyundai ID46 Pin Code with Xhorse Key Tool Max

 Xhorse VVDI Key Tool Max will calculate Hyundai/Kia ID46 PIN Code from working proximity smart key. Same operation goes to key tool or mini key tool.

The function requires online connection.

Easy steps shown as below:

Go to Transponder Clone

Put the original prox into induction coil

Read transponder information

Press Clone

Press Start Clone

Select read Kia/Hyundai password
Choose data Acquisition method (original key clone-long distance sniffer )

Close Xhorse Key Tool Max antenna to the ignition switch of car to collect data to carry out ID46 online calculation
Collecting data

Then put the original key into the coil for verification

Calculating password in process

Calculate Hyundai ID46 6-digit password from smart key success.

www.vvdishop.com

Program Xhorse Smart Remote Watch by Key Tool Plus

 Xhorse SW-007 Smart Remote Watch is designed and manufactured by Xhorse & FIYTA. This is an introduction of using Xhorse VVDI Key Tool Plus Pad to program SW-007 smart watch to your car, the tutorial is taking BYD as an example.

How to program?

Connect VVDI Key Tool Plus with car OBD;

Put Xhorse SW-007 watch on key slot.

1. Generate remote

Remote program >> China >> BYD >> Select appropriate model (BYD all types_smart white sliding key) >> Generate remote

2. Write password to watch

After generate successfully, press

Transponder clone >> ID46 online calculation >> Start clone >> Write BYD directly

Find out the password from original key, then write it into the smart watch.

3. Program the watch

After completing step2, go to

Immo programming >> BYD >> Select by model >> Select appropriate model (SONG) >> Start >> Clear and match original key or vice key(no need password)

Completed! Now you have a new generated remote watch including keyless go function, locking/unlocking, trunk opening/panic function, etc.

Let’s test the watch, it can open and starts the car.

Programming has done!

Xhorse Smart Watch will bring much convenience for car owners’ daily life.

http://blog.vvdishop.com/program-xhorse-sw-007-smart-watch-to-a-car/

What Token Reuqired to use Xhorse Key Tool Plus?

 Question:

Why I cannot buy MB unlimited tokens for the new Xhorse vvdi key tool plus?

Answer:

No.  The Key Tool Plus does not have unlimited tokens policy.

How to get Mercedes Benz password online calculation token for Key Tool Plus?

3 Ways:

• Way 1: Buy 1 token or 5 tokens. Require to provide device serial number to activate.

• Way 2: You can also use VVDI BE key pro or universal remotes to get token from key.  200 points= 1 token.

Add key costs 1 token (200 points) one time and All keys lost costs 2 tokens (400 points).

1 VVDI BE key comes with 200 points. BE key points can be used for MB calculation only.

Generate xhorse universal remote will get bonus points.   You can exchange these points to MB token as well.

Wire remote: 25 bonus points
Wireless remote: 40 bonus points
Super remote: 40 bonus points
Smart remote: 60 bonus points

• Way 3:  Link/Bind with Xhorse key cutting machines to get tokens (Condor Mini, Condor Mini Plus, Dolphin XP005)

Link 1 xhorse key cutter get 1 free token per day.

Link 2 xhorse key cutters get 2 free tokens per day.

(If you bind 2 or more key cutting machines, you can get up to 2 tokens per day only.)

Check: How to bind xhorse key cutting machine with vvdi mb or key tool plus?

 

If you cannot see points in key tool plus pad,  where to check points & tokens?

A: Go to Account and bind device you will see points.

same operation as in Xhorse App.

Q: What other token required when use the Xhorse Key Tool Plus?

A:

1. Benz online calculation token as above
2. ID48 96bit cloning: you can buy 1 token or get token for bonus points (100 points for per cloning)
3. Generate Toyota smart card:  200 points (only required in first generation, later it is free)

See also:

How to Exchange Points to Tokens in new Xhorse App?

How to Download Points from Xhorse VVDI BE KEYS

Read Navara 2011 Pincode by Xhorse VVDI mini OBD tool

 Xhorse VVDI MINI OBD Tool can read pincode for a Nissan Navara 2011 successfully. This is a quick guide of how to read.

Insert VVDI MINI OBD Tool into OBD port of Nissan.

Connect it via Bluetooth in Xhorse app.

Go to MINI OBD function page,

IMMO programming -> Nissan -> Read BCM code and release ELV90 (4 digits access code)

Start execution -> Wait loading until 100%

Select “Read BCM code”.

Turn ignition on, press “OK”.

Note: please turn on double flash lamps first if all key lost.

BCM No. (body computer number): C7060 was read out.

Use “5-digit BCM code calculation password” function to get the password to match!

(This function requires online)

Press “OK”.

Whether to calculate the password directly? Press “Yes”.

Calculate success!

Passwords were read out! (BCM code, old password, new password & fixed passwords)

Press “OK” to finish.

VVDI MINI OBD pin code reading has done!

Working with Xhorse Key Tool Max can perform remote functions, such as generate/clone remote, generate/clone transponder, OBD matching remote, etc.

https://www.vvdishop.com/