How to program a key ID83 for Ford Ecosport (-2017) via Xhorse VVDI Key Tool Plus Pad? Here is a quick demonstration of procedure.
Connect VVDI Key Tool Plus with OBD for ready.
Program Remote
Put the xhorse universal remote smart key into Key Tool Plus slot, press
Remote program >> Ford >> Ecosport >> Ford keyless go ID4D-83 2274 >> Generate
Wait writing data until 100%…
Burn success, press “Complete”.
Add a Key
Go back to main page, press
IMMO programming >> Ford >> China market >> Select by model >> Eco sport >> Smart key system >> -2017 >> Start programming >> Add smart key
Turn on ignition switch! Press “OK”.
Reading the password, it takes some time, please wait…
Switch ignition off and wait for 10s, then switch on, press “OK”.
Password reading completed.
Open then close driver door.
After press “OK”, please press UNLOCK button of smart key to be programmed for 1s within 15s.
Smart key programmed successfully by xhorse key tool plus, press “OK”.
Whether to match IMMO chip? Press “OK” to continue.
If the car has a key slot, please insert the key into the key slot.
Otherwise put the key into sensing area inside the armrest box.
Press “OK”.
Done!
Test the key now, the remote works well.
Using VVDI Key Tool Plus to add a smart key ID83 for Ford Ecosport successfully.
Xhorse SW-007 Smart Remote Watch is designed and manufactured by Xhorse & FIYTA. This is an introduction of using Xhorse VVDI Key Tool Plus Pad to program SW-007 smart watch to your car, the tutorial is taking BYD as an example.
How to program?
Connect VVDI Key Tool Plus with car OBD;
Put Xhorse SW-007 watch on key slot.
Remote program >> China >> BYD >> Select appropriate model (BYD all types_smart white sliding key) >> Generate remote
After generate successfully, press
Transponder clone >> ID46 online calculation >> Start clone >> Write BYD directly
Find out the password from original key, then write it into the smart watch.
After completing step2, go to
Immo programming >> BYD >> Select by model >> Select appropriate model (SONG) >> Start >> Clear and match original key or vice key(no need password)
Completed! Now you have a new generated remote watch including keyless go function, locking/unlocking, trunk opening/panic function, etc.
Let’s test the watch, it can open and starts the car.
Programming has done!
Xhorse Smart Watch will bring much convenience for car owners’ daily life.
http://blog.vvdishop.com/program-xhorse-sw-007-smart-watch-to-a-car/
Universal key programmer which is better, IM608 pro or the Xhorse Key Tool Plus pad?
Check the simple table comparison below:
Item | Autel IM608 Pro | Xhorse VVDI Key Tool Plus |
Ford 2019/2020: 1. Add key, 2. All key lost. | Yes | No |
GM 2018 up: Add key, read PIN by OBD | Yes | No |
Chrysler 2018-2020: Add key | Yes | Part Yes |
Mercedes Benz: Add key, all key lost. | 3rd IMMO Yes | 3rd IMMO Yes |
BMW: All key lost & other immo system functions | Yes | Yes |
VW: Add key, all key lost. | Yes | Yes |
Toyota: 8A mechanical all key lost | Part support require emulator | Part support without emulator |
Honda 2019 up: All key lost | Part Yes | No |
Hyundai 2018-2021:
2. 4A, 8A smart card. | Yes | Part Yes |
China-made: 2020 of some brands | Yes | No |
Keytool | Part Yes | Yes |
EEPROM | Yes | Yes |
Xhorse Key Tool Plus advantages comparing IM608Pro
Better in transporter cloning, remote generation, eeprom function and available to control key cutting machines made by Xhorse.
Can be combined with other xhorse tools.
Xhorse is way better programming Mercedes Benz than Autel (faster online password calculation)
Add a bunch of car brands like Ford, GM, Chrysler etc that does not support before. At present, the vehicle coverage and performance are approximately at a medium level, which is still far from im608 pro, but it is clearly catching up.
Key Tool Plus is good for VAG
Free update online
Autel IM608 Pro advantages:
Full system diagnosis, special service functions and odometer correction functions.
Diagnostic sofwtare is good.
the J2534 programmer is an added source of revenue
Expensive annually subscription
http://blog.vvdishop.com/xhorse-vvdi-key-tool-plus-vs-autel-im608-pro/
This is a demo of using new device Xhorse VVDI Key Tool Plus Pad to add a remote key for Toyota Corolla Altis 2014.
Prepare a working key & a new key to be programmed.
Connect VVDI Key Tool Plus Pad with OBD.
Turn on ignition.
Immo programming >> Asia >> Toyota >> Select by type >> Smart key system >> Type 3(8A/4D+ CAN) >> Start programming >> Read the number of keys
Switch ignition on, press “OK” >> OK >> Add a key
Switch ignition on, press “OK”.
It shows the number of registered keys:2, and remains 5 keys can be registered. Press “OK”.
Keep touching the ignition switch with sign surface of a registered key, complete the operations within 30 seconds after clicking “OK”.
You will hear a beep when touching.
Change to the new key, and keep it touching the ignition switch.
You will hear 2 beeps when touching.
Make sure all steps are completed. Wait for registration to complete.
Key registration succeeded! Press “OK”.
The number of registered keys are 3 now, press “OK”.
Now check if the functions of new key are normal. Alright, it works good.
Program Toyota Corrola Altis 2014 a remote key successfully.
Xhorse Key Tool Plus is an all in one automotive solution tool for locksmith daily use.
Xhorse VVDI Key Tool Plus Pad newly released Remote Online-cloud Recognition function which enable locksmith to quick and accurate recognize of your remote.
How to use Xhorse Key Tool Plus Remote Online-cloud Recognition?
Select Remote Program or Remote Clone
Then select Remote Online-cloud Recognition
Click Start, your remote can be easily recognized
The programming remote was obtained successfully
Sometimes, users need to choose the appropriate remote when recognizing multiple possible remotes
Select proper vehicle make and remote type
Video reference:
http://blog.vvdishop.com/xhorse-vvdi-key-tool-plus-remote-online-cloud-recognition/