VVDI Key Tool Plus Adds Ford Ecosport ID83 Key

 How to program a key ID83 for Ford Ecosport (-2017) via Xhorse VVDI Key Tool Plus Pad? Here is a quick demonstration of procedure.

Connect VVDI Key Tool Plus with OBD for ready.

Program Remote

Put the xhorse universal remote smart key into Key Tool Plus slot, press

Remote program >> Ford >> Ecosport >> Ford keyless go ID4D-83 2274 >> Generate

Wait writing data until 100%…

Burn success, press “Complete”.

Add a Key

Go back to main page, press

IMMO programming >> Ford >> China market >> Select by model >> Eco sport >> Smart key system >> -2017 >> Start programming >> Add smart key

Turn on ignition switch! Press “OK”.

Reading the password, it takes some time, please wait…

Switch ignition off and wait for 10s, then switch on, press “OK”.

Password reading completed.

Open then close driver door.

After press “OK”, please press UNLOCK button of smart key to be programmed for 1s within 15s.

Smart key programmed successfully by xhorse key tool plus, press “OK”.

Whether to match IMMO chip? Press “OK” to continue.

If the car has a key slot, please insert the key into the key slot.

Otherwise put the key into sensing area inside the armrest box.

Press “OK”.

Done!

Test the key now, the remote works well.

Using VVDI Key Tool Plus to add a smart key ID83 for Ford Ecosport successfully.

https://www.vvdishop.com/