Here’s a small tip to guide you quickly check vehicle mileage on Xhorse VVDI Key Tool Max Pro/ VVDI Key Tool Max programmer. You’ll need to have a working key at hand.
Put the working key into Key Tool Max slot.
Transponder clone >> Read transponder
Here to check key information including key type, specific chip, key ID, key status, cloneable or not, encrypte mode, code mode, brand, chip type, programming status, frequency, kilometers(KM) and key number.
Slide down the screen to find KM, It shows 612754km.
That’s the vehicle mileage.
* It should be noted that the function does not apply to all cars.
How-to: add remote key to Range Rover sport Discovery 3 year 2003-2009 with xhorse vvdi mini obd tool+ vvdi key tool max. When you add key remote control will be programmed together.
Go to Immo programming-> Landrover->Discovery 3->Key Programming->Start-> Program keys
Insert a valid key into the ignition switch and turn the ignition off
Done.
Some people reported that xhorse vvdi key tool max pro would not charge even changing different power adapters.
Here are the suggestions.
1. Do not use a fast charge brick.
For example don’t use those Samsung wall adapters, output is based off of the fast charging platforms for Samsung Devices.
Has to be low amp, and not variable volt/amp like fast charge samsung.
2. Use original charger cable, if failed try change another power adapter or port. Or try differnet cubes but use the original cable.
3. [Xhorse engineer solution] Connect another end of the usb cable to laptop/computer. Connect USB to computer for power supply。 It charges great.
If all failed, there maybe something wrong with your key tool max pro.
Here is showing how to unlock or renew a BMW F series HUF5662 smart key with Xhorse VVDI Key Tool Max. Certainly you can use the new VVDI Key Tool Max PRO instead. Simple operation, minutes to do.
This is the BMW locked key, it’s a transponder 49 PCF7953P chip.
Accessories Required
BMW Smart Key
VVDI Key Tool Max/ Key Tool Max PRO
Operation
Take off the PCB.
Go ahead on Key Tool Max programmer:
Special function >> Remote renew >> BMW >> HUF5662 F Series 315MHz Huf
Here we can zoom in to check the connection diagram.
Solder the wires to PCB, then connect renew cable to Key Tool Max.
After completing soldering, press “Unlock”.
Unlock success.
Desolder the wires from PCB to read the transponder again.
As we can see, it’s unlocked now.
BMW key renew has been successfully done.
How-to: program Nissan Almera 2003 BCM key with xhorse vvdi tools.
Step 1: Read BCM by xhorse vvdi prog
Upload dump to xhorse cloud server
You can find nissan bcm almera 2003 imo data in My data
Step 2: Clone transponder with vvdi key tool max via super chip xt27a
Clone 93c66 transponder with key tool max
Prepare dealer key success. Save key file.
www.vvdishop.com