Problem:
An error occurred when program CAS4+ key with xhorse vvdi key tool plus. Car not start. How can I recover the BMW CAS4 key code? It’s apparently missing or got lost during upgrade I guess.
“The synchronize code between working key and CAS4+ system was lost!!!
Provide extra power to car battery and check the working key.
If this code was lost, you can perform key learning function with ISN and it will restore this code.”
Read DME ISN on table and problem solved. Key works now and starts car.
I got a notification about the latest firmware and software 1.8 for the xhorse vvdi bimtool pro and thought I would have a go at getting the ISN read feature to work again. After some messing about it finally worked.
and we’ll see if we can read the isn’s from the dmes on the bench with bim tool pro with the new update.
I’ve actually found a download link from vvdishop.com
V1.8.0 VVDI BMW Tool software download
i’ve just downloaded and powered up the software.
my original msd80 that hasn’t been bricked yet down the bottom this is the one that i bricked a couple of weeks ago
when i was trying out this isn’t read the other day gonna be interested to see if xhorse bim tool will restore it i can restore it with a wing kfp but it’s just an msd 80 that i did just connect it to my original one and i’ve read the data off my original seems to be working
we’ll go through and do the update.
Go to Update Online- Update device firmware
The we go to Upgrade Kit to update the driver tool. it shows me now that we can get 1.8 firmware on there
Select BIMtool2 latest version and update
this is slow all right i’ll bring you guys back for an update once. that’s now booted
and we can close the upgrade kit
and we’ll see should we just restart vvdi bim tool version 1.8
so we’re still connected to the good DME
let’s go exchange ecu cas and read module information
We’ll have to power it on and read module information straightly
We’re now connected to the bricked dme let’s see if we can read this module information
okay it’s read the vin but the software and hardware are blank and that’s because this is one of the ones that we bricked
let’s see what happens when we go read ecu isn now
it wants me to reauthorize because it’s been over a month since i’ve had this software
We go Synchronize device time- Online synchronize
It says remaining time 30 days okay
Let’s read ecu isn
it would have raised the flash get to about 18 or 19
then it would die it would die during the erasing of the flash
it’s failed
i went down i’ve been going through settings and i ended up slowing down the communication speed between the vvdi and the ecu and now it’s programming part one
then it writes the uif information
checksum calculation
checking signature
so i think it’s verifying the flash
signature okay so let’s see what it does for upload part two reading is success
enter programming session it’s going to be interesting to see if it regenerates the software versions
amazing it’s actually worked
all right i’ll let that go through again
part of the write process
it has read the isn but we’ve still got no software version or data version
We read ecu read module information again
It’s back so we now have the data version the software version
i wonder if that dme will work
yeah i’m just going to try while we’re here now xhorse bim tool pro can update the vin number so let’s just see if it
it will actually let us update the vin number. We’re going to change the last digit of the number to six and we’ll just see what it does writing data success
what it updated the vin that quickly
so if you were doing a dme swap with this you could Let you can update the isn on the CAS module and then change the VIN number on the new dme to match the cars
That makes sense to match the cars and then you just have to write this isn number to the cars module and we have done a CAS isn update which we did on my car so this sort of works
i change programming speed and click that to one where it was three by default
but three would make an error one worked.
vvdi bim tool let me know things i can try and test well i’ve got modules to brick and not worry about too much.
http://blog.vvdishop.com/xhorse-vvdi-bimtool-pro-read-bmw-msd80-isn/
How to use Xhorse VVDI BIMTool Pro to unlock BMW CAS4/4+ key via DOIP? This is a quick demo of the procedure.
Operation Video:
https://www.youtube.com/watch?v=fNiW7rGX4Sg
Steps
Click “Connect” to identify BMW system.
CAS key learn >> OBDII – BMW CAS4/CAS4+ – F-Series >> Get key info
Unlock CAS4/CAS4+ >> Yes >> Yes >> Save
Now you can use the coding file to continue programming BMW keys.
You may need:
How to connect VVDI BIM Tool Pro via USB & DOIP?
http://blog.vvdishop.com/connect-vvdi-bim-tool-pro-via-usb-doip/
Using VVDI BIM Tool Pro via DOIP port can greatly quicken the speed when coding & programming. For programming to new module can even complete in 20 minutes.
2021 new Xhorse VVDI BIM Tool Pro enhanced edition for BMW is in stock now, this version fixed bugs to keep a stable system than before.
VVDI BIM Tool Pro Package Unboxing Review
Package List:
1pc * VVDI BIMTool Pro Main Unit
1pc * OBD Cable
1pc * Ethernet Cable
1pc * USB Cable
1pc * ECU Reflash Cable
1pc * Plastic Box
– Ethernet Cable, connect BIMTOOL via DOIP directly, make sure faster network speed during programming.
– USB Cable, connect BIMTOOL via USB, giving another way for computer only has one port.
– ECU Reflash Cable, connect BIMTOOL to do BMW ECU reflash programming.
It may help:
How to connect VVDI BIM Tool Pro via USB & DOIP?
http://blog.vvdishop.com/connect-vvdi-bim-tool-pro-via-usb-doip/