How to Test 868Mhz Frequency in Xhorse Remote Tester

 Xhorse remote tester failed to detect RF 868MHz frequency? Here is the clue how to fix it.

How to enable/disable RF 868MHz frequency in Xhorse Remote Tester?

supports frequency range arounf 315mhz, 433mhz, 868mhz,

You have to disable 868Mhz in US.

Remove the back side label and 4 screws on the remote tester.

Check the PCB, there is a jumper connection position

When the jumper connection as picture below means disable 868Mhz

When the jumper connection as pictures below means disable 868Mhz

Then install the back case of the xhorse remote frequency tester

Test 868mhz frequency again

It is working.

https://www.vvdishop.com/service/enable-868mhz-frequency-in-xhorse-remote-tester.html

How to Cut House Key with Xhorse Condor II Built-in Database?

 Kwikset & Schlage cut are the newly added functions on Xhorse Condor XC-Mini Plus II key cutting machine for household keys. As long as you have the M4 Clamp& bitting codes, household key cutting is an easy job.

How to cut a Kwikset key on Condor II?

https://www.youtube.com/watch?v=MgORz31GApA

Household key >> Kwikset >> Other >> KS1FT

M4 Clamp should be shoulder align.

Put a new key blank on clamp.

Input its bitting codes:24374

Start cutting >> OK

Condor Mini Plus will starts cutting automatically.

Just wait until 100% completed.

Perfectly done!

How to cut Schlage key on Condor II?

https://www.youtube.com/watch?v=2bMz4RhH9eU

Household key >> Schlage >> Other >> SH7

Fix a new key blank on M4 Clamp firmly.

Enter key bitting codes: 487472

Start cutting >> OK

Condor 2 Machine will finish the cutting automatically.

Just let it do.

When cutting is completed, we can see it did a great job.

*Only Condor II has house key database.

Xhorse Key Cutting Machine is specially designed for locksmiths to experience smart & easy key cutting. Follow us to learn more new features and developments.

www.vvdishop.com

Xhorse Key Tool Max Pro Adds GM CAN FD BMW CAS3 Immo

 To make it a more powerful and competitive tool, Xhorse VVDI Key Tool Max Pro will add BMW CAS3 and partial Toyota key programming feature with the built-in OBD module.  Like always, Xhorse offers continuous upgrades on this very new machine and more can be expected!

Other New Features:

Add GM CAN FD immo programming, including
Cadillac CT4/CT5 CAN-FD
Buick GL8/Encore etc CAN-FD
Chevrolet Cavalier/Trax etc CAN-FD

i.e GM Cavalier 2020 (blade key and smart key bypass pin code) the CAN-FD is coming together

Renault Kwid 2022 (requires 39-digit Pincode)

Toyota 8A/E Immo Box H with xhorse 8A cable

Dodge Neon 2017 AES Transponder and more

Combining the needs of automotive locksmiths with our innovations, KEY TOOL MAX PRO features a new battery test module. By simply connecting to the leakage detection cable, users can test whether a remote battery is having electric leakage (range: 1μA~35μA) and detect the voltage of a remote battery (range: 0V~36V).

Keep updating…

www.vvdishop.com

Can I Precode Xhorse Super Chip with Autel IM508?

 Question: I would like to ask you if Autel IM508 + XP400 Pro can precode and program Xhorse VVDI super chip XT27? Can you please take the time to explain to me how i can use my tools to program these VVDI super chips.

Answer:
Super chip NEED TO BE CONVERTED to the required ID before programming. This chip is from Xhorse you need to use Xhorse tool for it, same situation as you buy a xhorse universal key with remote, you need also a vvdi tool to precode. Other tools cannot. Neither Keydiy kd-x2 or Autel KM100 can generate super chips.

Only one exception- xhorse BE/FBS3 key for Mercedes, you can use with other devices (Autel/CGDI etc)

You have to generate your chip with vvdi Mini Key tool/Key tool max then Autel can program it. That is, you generate an ID48 with vvdi and then autel can dedicate it to vw (for example) and program it in the car.

How to Avoid Xhorse Dolphin Condor Probes Breaking?

Sometimes your Xhorse Dolphin or Condor key cutting machine will break probes when it tries to decode key blades.  Here’s the useful tips to solve or avoid probe breaking problem.

1). Update the app and software. Keep app and software up-to-date.

2).

Check if battery is good. Make sure the charger it’s not connected and keep a good backup amount just in case.

3).

 Always clean blade well before decoding. Probe knows it is touching the key by an electrical circuit being completed, if you break a tip itsa because the circuit didn’t complete, dirt is the reason.

And always have 5 or 10 probes in stock. The xhorse key cutting machine uses electric current to detect the blade, if it has dirt or grease on the blade, it will break.

The blade is too dirty and has no electrical conductivity.Or the key blank isn’t clear enough. Clean it with alcohol first.

4). Recalibrate the machine.  Calibrate it again when you get the new one and will make sure about the blade.

5).  Do a conductivity test/ electrical conductivity measurement to roughly test which is abnormal, probe or cuter. The probe decodes keys using electrical conduction and sometimes the probe gets light surface rust preventing it from reading your key properly. There is also a conductivity test under the Device Information tab on the app.

Xhorse Dolphin XP005 Electrical Conductivity Measurement?

6). It may be that the ground wire inside the machine is broken.

Sometimes, there’s a ground cable that needs to be replaced. That’s the one that detects, but this need replace only when prob breaks all the time. You need to open the machine and change it.

Check instruction here

Other option:

Take the optical reader (xhorse key reader decoder) it prevents breaking guides.