Dolphin XP005 Cut Hyundai HY22 All Key Lost

 To cut a Hyundai Sonata HY22 with Xhorse Key Cutting Machine when all keys lost, you’ll need to get its key code at first. After successfully reading out bittings with LISHI tool, I’ve got the key code K1635. Now, it’s up to Xhorse to do the rest!

This time I’m going to use Xhorse Dolphin XP005 to finish the job. It’s surely workable if you have a newer Dolphin 2 as well.

Procedure

All key lost >> Hyundai >> Enter key code: K1635 >> HY22

It tells to use M5 clamp on B side, tip align position line 2.

Put a key blank to fix on M5 clamp.

Cut key >> Cut

Dolphin XP005 will start cutting directly…

Wait processing until 100%.

After one-side cutting was finished, turn over the key to cut the other side.

Cut key >> Cut

All we have to do is just waiting and let it go.

Once cutting finished, take out the key for a test.

It actually works and works perfectly.

Done.

www.vvdishop.com

Xhorse Dolphin II Decode VW HU66 Bitting by Photo

 How to decode a Volkswagen HU66 key by photo scanning with Xhorse Dolphin key cutting machine? Following is taking Dolphin XP005L as a demonstration. The procedure can be used to read most key types as well.

Xhorse App >> Dolphin >> Take photo to recognize bitting >> Volkswagen >> HU66

Put the key blade horizontal in the fixed area.

Keep key tip on the top.

Dolphin II will automatically read each bitting with dots.

Press “OK”.

Bitting codes were read out in seconds.

It’s 11214443.

Quickly done.

How to Avoid Xhorse Dolphin Condor Probes Breaking?

Sometimes your Xhorse Dolphin or Condor key cutting machine will break probes when it tries to decode key blades.  Here’s the useful tips to solve or avoid probe breaking problem.

1). Update the app and software. Keep app and software up-to-date.

2).

Check if battery is good. Make sure the charger it’s not connected and keep a good backup amount just in case.

3).

 Always clean blade well before decoding. Probe knows it is touching the key by an electrical circuit being completed, if you break a tip itsa because the circuit didn’t complete, dirt is the reason.

And always have 5 or 10 probes in stock. The xhorse key cutting machine uses electric current to detect the blade, if it has dirt or grease on the blade, it will break.

The blade is too dirty and has no electrical conductivity.Or the key blank isn’t clear enough. Clean it with alcohol first.

4). Recalibrate the machine.  Calibrate it again when you get the new one and will make sure about the blade.

5).  Do a conductivity test/ electrical conductivity measurement to roughly test which is abnormal, probe or cuter. The probe decodes keys using electrical conduction and sometimes the probe gets light surface rust preventing it from reading your key properly. There is also a conductivity test under the Device Information tab on the app.

Xhorse Dolphin XP005 Electrical Conductivity Measurement?

6). It may be that the ground wire inside the machine is broken.

Sometimes, there’s a ground cable that needs to be replaced. That’s the one that detects, but this need replace only when prob breaks all the time. You need to open the machine and change it.

Check instruction here

Other option:

Take the optical reader (xhorse key reader decoder) it prevents breaking guides.

Xhorse Dolphin Seat ibiza 2011 No Data Solution

 Question: Seat ibiza 2011 no data in Xhorse

Can someone please help to decode with xhorse dolphin or condor key cutting machine?

Solution:

You can get bittings from photo. You can find the function from Decode key.

Check instruction: Xhorse Condor/Dolphin Decode Key by Photo Scanning

Read and Cut Honda Activa 5G Key by Xhorse Dolphin

This is a quick demonstration on using Xhorse Key Reader XDKR00GL + Panda XA-006 or Dolphin XP005/Dolphin II to read & cut a Honda Activa 5G key. Beyond that, Key Reader also supports connecting other Xhorse Key Cutting Machines or work alone. Let’s take a look how easy to operate it.

Connect to Panda key cutting machine firstly.

Optional identification >> Honda(Cycles) >> Activa 5G >> OK

Insert key blade vertically into Xhorse Blade Skimmer slot.

Identification >> Identification

Identification successful.

Bitting codes were shown on screen: 12112313

We can go on to cut key directly.

Install a blank key on clamp.

Cutting key >> Continue

Xhorse key cutting machine will start cutting automatically…

Cutting key completed.

Compare the new key to working key.

They are same.

New key can switch lock perfectly.

Done.

www.vvdishop.com