How to use Xhorse VVDI Key Tool Plus to clone Chip 48 online for a Chevrolet Colorado Z71 2009? Here I’ll make a quick demo to show the steps.
Tools
A working key
A new blank key with Super Chip XT27A66
Procedure
Put the working key into Key Tool Plus coil, press
Transponder clone >> Read transponder
As you can see, it is a ID48 chip.
It’ll requires 100 points for ID48(96bit) online calculation.
Clone >> Start clone
Data collecting… put coil near ignition start and switch on off, then remove key out 8 times.
1 time successful in collect data,
2 time successful in collect data…
Repeat 8 times to finish.
Put original working key into Key Tool Plus coil to calculate.
Upload data success.
Wait Xhorse server for calculating…
Read original working key success.
The the working out, put Super Chip XT27 into coil.
Cloning successfully.
Now put the VVDI Super Chip into new key to have a try.
It can start the engine.
Done!
This is using Xhorse VVDI Key Tool Plus & XT27 Super Chip to clone ID48 for Chevy Colorado Z71 2009 successfully.
Possible to make BMW X5 E70 2009 4.8 all keys lost with Xhorse VVDI BMW tool/VVDI BIMTool Pro if i I’ve got CAS3+ eeprom dump from vvdi prog and Bosch ME9+ dump from K-tag?
Yes. Not work by obd. If you have the files, do as following:
Select key position. Prepare dealer key with vvdi bmw programer.
Then select have ecu dump, load ecu eeprom dump.
Put blank key in slot and click ok.
vvdi bmw will give you a new eeprom that you have to write back in cas3.
Write it via vvdi prog.
Put cas3 back to the car and key will work.