ابزار Xhorse VVDI
Xhose VVDI نرم افزار برنامه نویس اصلی و سخت افزارابزار Xhorse VVDI
Xhose VVDI نرم افزار برنامه نویس اصلی و سخت افزارTips to Program BMW E70 All Keys Lost with VVDI BMW
Possible to make BMW X5 E70 2009 4.8 all keys lost with Xhorse VVDI BMW tool/VVDI BIMTool Pro if i I’ve got CAS3+ eeprom dump from vvdi prog and Bosch ME9+ dump from K-tag?
Yes. Not work by obd. If you have the files, do as following:
Select key position. Prepare dealer key with vvdi bmw programer.
Then select have ecu dump, load ecu eeprom dump.
Put blank key in slot and click ok.
vvdi bmw will give you a new eeprom that you have to write back in cas3.
Write it via vvdi prog.
Put cas3 back to the car and key will work.
If key is engaded, but ignition doesn’t switch on (displays CAS lost ISN value error shown image below), you need to read ISN from EGS if it is E70. You have to manually input the EGS ISN into CAS. Find a guy who can help you. Need only small program and Ediabas-compatible cable and that’s all.
Xhorse VVDI BMW Tool Good and Bad
An increasing number of users have Xhorse VVDI BMW tool, so I’d like to put together its test reports good and bad, wish help more people who are interested in Xhorse VVDI BMW.
vvdi bmw tool Ok list…
- Support instrument cluster memory M35080 v6 – done
- I was able to connect and code the test kit I built with cas3, kgm, kombi, ahl, where communication is via d-can cable. I was able to code two controllers and program the meter. In fact, before these activities, the program downloaded data from the internet. Today I tried to connect to E83 and failed, and should also code this car. We managed to change the mileage in CAS3 + through obd and change the mileage from read m35080v6 memory. For now, I have not tried to do more on the car.
- Key programming in 2004 E60 with CAS2 successful.
- I think that key programming is well done because vvdi2 has had CAS3 ++ keys for a long time.
- Got the vvdi bmw tool and for now I did two keys – one for E63 CAS2 and second for E87 CAS2. Both without problem, 3-4 minutes job, but actually, this is no big achievement .
In F15 it reads FA and coding properly, but can’t recode. Also, after loading dump from EWS3 it shows that mileage is 0km – of course not so big problem.
- I’ve read ISN from MSD80 from 2008 E92 335i US. Not thru OBD port, but by doing little harness on bench like in diagram.
…
vvdi bmw tool failure list…
Currently it is not possible to code or read the FA car of the 2004 E60.
But the 2009 car from CAS3 was able to be read from FA
But the 2009 car from CAS3 was able to be read from FA
Can identify car, but reading FA/VO fails. Entering FA manually shows only blank tables. Tried on bench setup with cas3++
To be upgrading…
VVDI BMW Supported Mileage Reset Type List
Here vvdishop.com lists Xhorse VVDI BMW tool supported File Change KM BMW type list:
by uploading File to change KM (odometer), not OBD
Type List:
EWS1
EWS2
EWS3
EWS4
CAS1(0K50E)
CAS2(2K79X)
CAS3(0L01Y)
CAS3+(0L15Y,0M23S)
CAS4(1L15Y)
CAS4(5M48H)
M35080(E-series instrument)
35160,35128 (F-series instrument)
EWS2
EWS3
EWS4
CAS1(0K50E)
CAS2(2K79X)
CAS3(0L01Y)
CAS3+(0L15Y,0M23S)
CAS4(1L15Y)
CAS4(5M48H)
M35080(E-series instrument)
35160,35128 (F-series instrument)
VVDI BMW adds CAS EEPROM Fix Function
When you BMW CAS+ downgrade failed, no more sweating and pain. VVDI BMW Tool released a “Fixed CAS EEPROM” function.
Use VVDI BMW function to Fix eeprom boot mode of CAS BMW.
Q: Is this function all through obd2?
A: Need to load eeprom and then write back to the unit.
Q: No hooking up to the eprom?
A: need, you fix the problem anyways
Q:Does this function will come also for cas4+ in the future?
A: CAS4 will be added in the feature.
Program BMW X6 CAS3++ Key using VVDI BMW Tool
New customer feedback:
Xhorse VVDI BMW tool program 315MHz remote key for BMW X6 CAS3++ immobilizer success, it’s good.
Make sure your vehicle has enough power supply.
Remote control works.
The new key can start vehicle.
