Program Toyota 8A Smart Key with Xhorse VVDI Mini OBD Tool

 How to unlock & program a Toyota 8A Smart Key using with Xhorse VVDI Key Tool Max + Mini OBD Tool via OBD?

This is a Toyota Smart Key that was already programmed to another vehicle. Now I’m gonna unlock and reprogram it, here we go.

• Unlock Key

Plug VVDI Mini OBD Tool into OBD for connection.

Let’s read the key first, it is “Have learned”.

Go back to main page on Key Tool Max, press

Special function >> Unlock Toyota Smartkey >> Unlock

Unlock OK.

Go back to read the smart key again.

It is “Blank”.

So now we can use the 8A Smart Key to program to a new Toyota.

• Program Key

Go to Mini OBD Tool main page, press

Immo programming >> Toyota >> Select by type >> Smart key system >> Type 3 (8A smart card) >> Start execution >> Add a key

Please switch ignition on.

Confirm key number, press “OK”.

Hold the 8A Smart Key touching on the IG switch, after hearing beep twice, key registration succeeded!

Test the key, it does work!

Key programming has done.

This is using VVDI Key Tool Max & Mini OBD Tool to unlock & reprogram a Toyota 8A Smart Key successfully.

https://www.vvdishop.com/

VW Passat 2015 NEC24C64 Add Key by Xhorse Key Tool Plus

 Here is a Volkswagen Passat 2015 original key & a new key, need to program the new key with Xhorse VVDI Key Tool Plus Pad via OBD.

Connect VVDI Key Tool Plus with OBD, let’s start:

• Read & Save Data (EEPROM, IMMO)

Immo programming >> Europe >> VW >> Automatically diagnose models >> Start programming >> OK >> Read EEPROM

Switch on with working key before press “OK”.

If car has keyless GO, put the working key nearby car coil and switch on.

Follow the notes to operate in next steps, press “OK”.

Note: the dashboard will remain dark until “Reset Instrument”.

OK >> OK >> Save here >> Rename, OK

Save file success.

Read immo data >> Continue >> OK >> OK >> Save here >> Rename, OK

Save file success.

• Make Dealer Key & Key Learn

Generate dealer key – load immo data >> Select data file, open >> Continue >> Prepare normal dealer key >> Yes

Please place an unlocked 48 chip into the VVDI Key Tool Plus coil, press “OK”.

Key make okay and locked!

Key learn >> Yes >> Add the dealer key into immo system directly

Put the new key into Key Tool Plus programmer. If car has keyless, only learn key method can add key to immo.

Press “Yes”.

Add key success. Reset instrument after all operation is finished.

Press “Reset Instrument”.

Reset success.

• Program Remote

Go back to

Select by type >> Remote system >> 09 central control system (CAN) – BCM >> Start programming >> Program remote

Learn remote control. You need prepare all key that you want to learn remote control.

The key will not remote control car if it is not learned.

Press “OK”.

Input learning key numbers, press “OK”.

Remove the key from the ignition switch, press UNLOCK button for 1s, double flashing indicates that the remote has been recognized, operate the remote to be programmed in order according to above methods within 15s…

Remote control completed!

Note: some vehicles can only match one key at a time. If need to program multiple keys, please perform this function again.

Let’s test the key now, both can work well.

Adding key has done!

2015 VW Passat key programming via Xhorse Key Tool Plus is successful!

Program Audi A4 BCM2 All Keys Lost by Xhorse Key Tool Plus

 2011 Audi A4 5th immobilizer system all smart keys lost done with xhorse vvdi key tool plus today. It’s a good tool for me.

Preparation:

decode and open the door with Lishi auto pick

Main steps:

Step 1: Read BCM2 data

Step 2: Make dealer key

Step 3: Learn key

Procedure:

After connect keytool plus pad, go to Immo Programming->Audi ->Selec by type->Fifth Immobilizer system ->Read by OBDII->Read BCM2 Data (OBD)

Insert dealer key into the ignition, open headlight and step on the brake to wake up instrument before continue

Read vehicle information

Disconnect BCM module from power fOR 2-3 seconds and reconnect again.

Read data success
Save data
Go back to 5th Immo menu, select Make dealer key

Choose method: A4L, A5, Q5 add key or lost all key- Don’t need working key

Press Ok to load BCM2 data read in step 1
load file success

Put a key into the Xhorse key tool plus programmer
Reading and reprogramming key info
Writing data

Make dealer key success

In 5th Immo System menu, select Learn Key

select 1 key to be learn
Load BCM2 data read in step 1

Insert working key into ignition and witch on before continue
If lost all working insert dealer key into the ignition, open headlight and step on the brake to wake up instrument before continue

learn key success

The new key is working no issue.

http://blog.vvdishop.com/xhorse-vvdi-key-tool-plus-audi-a4-2011-bcm2-all-keys-lost/

How to Add Key Mercedes C250 2007 W204 by Xhorse Key Tool Plus

 Xhorse VVDI Key Tool Plus supports to add a spare jet key for Mercedes Benz C250 2007 W204 by OBD successfully.

Here we go to show the procedure:

Connect VVDI Key Tool Plus with OBD2 port.

Turn ignition switch on, press

Immo programming >> Europe >> Benz >> Automatically diagnose models >> Start programming >> Yes

Add key – 1 token.

All key lost – 2 tokens.

1. Read Data

Process Wizard mode >> Begin >> Yes >> Save to file >> Save here >> Rename, OK

2. Data Acquisition

Press “Yes” to add key.

Insert working key to EIS before press “OK”.

Take working key out of EIS before press “OK”.

Insert working key to EIS before press “OK”.

If car with keyless go function can not finish synchronize, please try the following step:

Insert key and Start engine >> Switch OFF >> Switch ON

Insert working key to “Device IR Reader” of VVDI Key Tool Plus before press “OK”.

Processing data acquisition…please wait

Insert working key to EIS before press “OK”.

Please wait 23s…

Insert working key to “Device IR Reader” before press “OK”.

Press “OK” to save collection data.

Save here >> Rename, OK

Acquisition finished, upload the saved data with “Upload Data” for password.

3. Upload Calculation Password

OK >> OK >> OK >> OK >> OK >> Select EIS file, open

Please ensure whether the SSID and password are correct.

Yes >> OK

4. Prepare Key File

Select the type of generated key file: v051, press “OK”.

Calculating require 10s, query after 5s, please wait…

OK >> Save here >> Rename, OK >> OK

5. Write Key File

Press “OK” to load key file to be written >> Select file, open

Please insert the new Xhorse VVDI BE Key into the infrared antenna of Key Tool Plus.

OK >> Continue

Program process is successfully completed, please activate the key(most keys can be activated by inserting into the key lock).

Test the key after activation, it can work normally.

Done!

This is the procedure of using VVDI Key Tool Plus to program a new key for Mercedes Benz C250 2007 W204 via OBD.

https://www.vvdishop.com/

Citroen CN22 Key Cutting with Xhorse Dolphin XP005

 Using Xhorse Dolphin XP005 Key Cutting Machine to cut a Citroen CN22 key should be installed with M3-B clamp.

Prepare an original key & a key blank.

Install the original key on M3 clamp beforehand.

Go to Xhorse app to control, press

Vehicle database >> Citroen >> All key blank >> CN22, 5 bitting, 830*370 >> OK >> Decode key >> Continue

Tip: please rotate the key to the position shown as pic.

Dolphin XP005 machine starts decoding…

When the key decoding is successful, it will tell the bitting codes on screen.

Replace the original key to install new key blank on clamp, press

Cutting key >> Continue

Dolphin XP005 machine starts cutting…

Wait until the key cutting is completed.

Take out the key to have a try, it is same as original one, and it does work.

Done!

It is quite simple to cut a Citroen CN22 key via Dolphin XP005 Automatic Machine, it takes me only 5 minutes to finish.

https://www.vvdishop.com/