VVDI MB Supported ECU Renew List

Need one best and cheap MB ECU renew tool mainly for sim271de/ke20, Sim4se, me9.7, Cr3.xx , cr4 etc, Xhorse VVDI MB tool is the top choice for many renewal work. I am sure u will be happy. For token point, yes it has a token system but there is an unlimited token option too. It can do many brands, make keys, renew keys and many more options.

In details:

1. vvdi mb tool renew Sim4se ECU

2. vvdi mb tool renew X164 cr4 ecu

3. Vvdi MB renew Mercedes ecu Cr3.xx

How to use vvdi mb tool to renew Mecedes W211 ECU Cr3.xx.

Step-by-step procedure with images here:

http://blog.vvdishop.com/vvdi-mb-tool-renew-mercedes-w211-ecu-cr3-xx/

4. vvdi mb tool renew ECU ME9.7

– connect to VVDI with adapter and power through OBD

– read data

– get erase pass

– Save data(backup)

– Renew – success

Now you can initial startup in DAS/Xentry, have there 2 possibility…with data from old ECU or without…  then online

FOR get erase pass ONLINE WITH DEVICE VVDI MB , After reading data ECU (with vvdi mb)

pin connection for ME9.7 MB

Mercedes-Benz ME9.7 connected to data read from ECU, did not try to reset. Check the scheme of connection.

Connect the cables from VVDI MB tool OBD to ECU directly and give power supply. Every function is fine. If you using Benz ECU test adapter cable, please check did the can high and can low of the plug is short circuit. Sometimes there will have short circuit on the serial port of the ECU adapter.
In my case I’m not using resistance.

OBD2 side:

Pin Number	Pin Name	Description
1	K-Line	Ignition control (EZS), air-conditioner (KLA), PTS, safety systems (Airbag, SRS, AB) and some other
3	TNA	TD engine rotation speed
4,5	GND	Ground
6	CAN-high	CAN-High (including AirBag system in W203, W209, W220, W240, R230, ?215 after 2004y)
7	K-Line	Engine control diagnostic (ME/MSM/CDI)
8		Ignition,…
9	K-Line	ABS, ASR, ESP, ETS, BAS diagnostic
11	K-Line	Gearbox and other transmission components (EGS, ETC, FTC)
12	K-Line	All activity module (AAM), Radio (RD), ICS, …
13	K-Line	AB diagnostic – safety systems
14	CAN-Low	CAN
15	K-Line	IC, KI), TAU, LWR diagnostic
16	+12V	Power

ECU Side:
2: Ground
15 & 16: 12 Volts
41: CAN High
54: CAN Low

5. vvdi mb tool renew ECU 722.9 ETC board (7-gearbox module) version VGS_73

Successfully renewed 10 pcs of used 722.9 ETC board (7-gearbox module) version VGS_73 or like as “3” with VVDI MB tool

and ONE pcs today assigned to the car using MB-SCN online access.

Finally, what is Benz ECU test adapter cable used for?

Look at these ECU adapters full set (add one extra sim4le sim4se cable):

Used for: renew ECU

Works together with: VVDI MB tool and other devices As long as the ECU flashing tool supports CAN protocol and meanwhile supports these ECU types.

Workable ECU types:

CR3.XX

CR4.XX

CR5

CR6

CR60.XX

SIM271DE2.0

SIM4LKE

SIM271KE2.0

CRD.11

CRD2.XX

ME9.7

MED17.7.X

SIM266

sim4le sim4se

Enjoy.

http://www.vvdishop.com/service/vvdi-mb-renew-benz-ecu-sim271-cr3.html

Xhorse APP released to new version V1.7.5

Xhorse APP released to new version V1.7.

V1.7.5 New Feature

– New AKL (all keys lost) support: VVDI Key Tool supports BYD all keys lost
– New chip support: VVDI Mini Key Tool supports OEM 46 chip copy
– New language: Turkish (Local dealer)

Will Xhorse Condor Duplicate Smart ForTwo Keys?

Have Smart fortwo 2003 with the button remote key. how do we cut this one? I have Condor XC mini and Condor Dolphin if that helps.

Smart 450 uses YM23.
Condor can make these 100%.
Also hu100r works fine.

Never by code.
If you measure up the cuts, you could select a similar keytype.
Or possible cut a depth of 1 on two positions.
The update tool allows you to create your own custom key files

I assume that your Condor mini can do the same as my master 007.

I have created a YM23 with 8 cuts. I placed it in the mercedes key folder.
Not sure that we can exchange theys files, but let us try.

Could someone load this custom KeyData.u file in there Condor.
Mini and or master.
Place the KeyData.u file in your condor file that contains: Condor 007 update software V1.0.5
Then open the CustomKeyTools,
Connect your pc with your condor using usb, and press synchronize.

Credits to @ rob h (dk member)

www.vvdishop.com

Condor Mini Plus Instacode + CustomKey Tools FAQs

Question 1: if you have an update for Instacode Live for the Condor XC-Mini Plus.  I already pay for Instacode and when I try to add my machine to my preferred cutting machine, it only has Condor Mini Bluetooth connection.

Question 2: After opening “CustomKey Tools”, I notice these options are under development, will you update in the near future?

vvdishop.com engineer reply:

1. In fact, Condor MINI plus Bluetooth communication port same as Condor XC-MINI, so if you activation authorization from instacode live, you can connect the machine to APP directly.

2. For Xhorse customize key data software, same you can use KM03 software, after you make the new profile of customize keys, you can connect machine to PC, then run sync data function. (after sync you can find customize data from cut by bitting)

Enjoy!

http://blog.vvdishop.com/question-on-condor-mini-plus-instacode-customkey-tools/

Program BMW X6 CAS3++ Key using VVDI BMW Tool

New customer feedback:

Xhorse VVDI BMW tool program 315MHz remote key for BMW X6 CAS3++ immobilizer success, it’s good.

Make sure your vehicle has enough power supply.

Remote control works.

The new key can start vehicle.

http://www.vvdishop.com/wholesale/xhorse-vvdi-bmw-coding-programming-tool.html