ابزار Xhorse VVDI
Xhose VVDI نرم افزار برنامه نویس اصلی و سخت افزارابزار Xhorse VVDI
Xhose VVDI نرم افزار برنامه نویس اصلی و سخت افزارVVDI MB Program Benz W211 All Keys Lost
Mercedes Benz W211 all keys lost programming done by Xhorse VVDI Prog and VVDI MB BGA Tool.
1- read with vvdi prog
2- load dump to VVDI MB
3- prepare keys
4- write key
5- start the car
No need to write back dump
Xhorse VVDI2 Software V6.6.5 Update Feature
Xhorse VVDI2 key programmer software update to V6.6.5 on Aug. 29th, 2019.
*** 2019-08-29
*** Require firmware V6.6.5
************************************************************************
===== VAG V6.6.5 =====
1. Improvement for autodetect VAG immobilizer system
2. Bugfix
*** Require firmware V6.6.5
************************************************************************
===== VAG V6.6.5 =====
1. Improvement for autodetect VAG immobilizer system
2. Bugfix
===== BMW V6.6.5 =====
1. Improvement for CAS4/CAS4+ via OBDII
1). Support unlock CAS4 directly, no need update CAS4 flash
2). Improvement for key learning
2. Bugfix
1. Improvement for CAS4/CAS4+ via OBDII
1). Support unlock CAS4 directly, no need update CAS4 flash
2). Improvement for key learning
2. Bugfix
===== Porsche V6.6.5 =====
1. Bugfix
1. Bugfix
===== PSA V6.6.5 =====
1. Bugfix
1. Bugfix
===== Transponder Programmer V6.6.5 =====
1. Bugfix for generate and copy Toyota H chip with VVDI super chip
2. Immobilizer data tool: Asia->Nissan->Note 2004 95080 bugfix
3. Bugfix
1. Bugfix for generate and copy Toyota H chip with VVDI super chip
2. Immobilizer data tool: Asia->Nissan->Note 2004 95080 bugfix
3. Bugfix
===== Copy 48 (96 bits) V6.6.5 =====
1. Bugfix
1. Bugfix
===== J2534 V6.6.5 =====
1. Bugfix
1. Bugfix
===== Online Update Tool V6.6.5 =====
1. Bugfix
1. Bugfix
===== Quick Start V6.6.5 =====
1. Bugfix
1. Bugfix
Free Download VVDI2 6.6.5 Software
How to use Xhorse Dolphin XP005 to cut key by biting?
Two ways of using the key bitting to make a key:
Method 1 :
Making a key without the original key.
1.Use some special tool to get the key bitting.
2.Break down the lock to read the key bitting on each metal of lock.
1) Click on “Cut by biting” on the main page
2) Select a key blank type
3) Select the ket type
4) Fix the key according to the picture show, select proper side of clamp and fix the key in correct position.
Put in the key bitting and check all the information before you click on “Cutting key” for make new key.
2) Select a key blank type
3) Select the ket type
4) Fix the key according to the picture show, select proper side of clamp and fix the key in correct position.
Put in the key bitting and check all the information before you click on “Cutting key” for make new key.
Method 2:
Making a key with the original key.
1) Click on “Cut by biting” and select a key blank type
2) Select the key type
3) Click on “Decode key” to duplicate key biting
4) Click on “Cutting Key”
2) Select the key type
3) Click on “Decode key” to duplicate key biting
4) Click on “Cutting Key”
How to use Condor Dolphin XP005 to copy key?
Car models and years are needed for key duplication
1) Click on “Vehicle Database” on the main page
2) Select or type the car maker
3) Select the car model
4) Select the car model and year
5) Follow the tips on screen and correctly put the key on the clamp, click “Decode key”
6) After getting the original key bit, put an new blank key and click on “Cutting Key”
2) Select or type the car maker
3) Select the car model
4) Select the car model and year
5) Follow the tips on screen and correctly put the key on the clamp, click “Decode key”
6) After getting the original key bit, put an new blank key and click on “Cutting Key”
How to use Xhorse Dolphin XP005 Key Database?
Three ways to make keys from the key database
1. Original key code card from factory
2. Key code information on lock for some car models
3. Other ways to get the key code.
1. Original key code card from factory
2. Key code information on lock for some car models
3. Other ways to get the key code.
1) Click on “All key lost”
2) Select a car maker
3) Put in the key code circled and click “QUERY”
4) Select the key series
5) The key bit will be automatically generate on the screen. Click “Cutting Key”
2) Select a car maker
3) Put in the key code circled and click “QUERY”
4) Select the key series
5) The key bit will be automatically generate on the screen. Click “Cutting Key”