How to use VVDI Prog to read Delphi MT86 (3500) Gearbox?

Delphi MT86 (3500) Gearbox
Hyundai – Kia

-Read and write ok by ECU reflash cable
-Pinout some as VVDI-Prog manual
-Other operation some as picture

The power should be disconnect and connect before each operation.

Here comes one problem:

i am trying to clone mt86 with 2 infineon inside , i tried to read with vvdi prog the old ecu it says chip not connected i did exactly as the help in vvdiprog. The old ecu have only 3 coils working i don’t know what component is for the coils so i decided clone on other one.

car start with old ecu , and also i tried to read with combiloader it read flash normally i copied on donor ecu but car didnt start so i want to copy whole flash and eeprom with vvdi prog but always chip not connected.

Solution:

In the Delphi MT86 you have 2 Tricore _ TC1766 ( Motor + Gearbox )
To read TC1766 motor you should use this method :
Raise PIN 122 (PIN 122 should be lift).

Good luck.

www.vvdishop.com

How to Update Xhorse Dolphin XP005 Software?

Xhorse Condor Dolphin XP005 Key cutting machine Online Update

Database online update

1) Enter Dolphin XP-005 main interface and click “Update”
2) Click “Database update”
3) If you find a new version, click “Update” and download the new version. Click on “OK” after download database success.

*If cellphone connected by mobile internet data, a prompt saying that download maybe costs data fee, recommend downloading by WiFi.

Upgrade by upgrade kit

Three ways to get the update package.
1. Contact us for the upgrade kit
2. Send an email titled “update tool” to support@ xhorse.com
3. Consult with online customer service on Xhorse App.

Steps to update both database and firmware with update package

1) Connect the dolphin with a computer through USB cable, run ‘Upgrade Kit’ ,and click “Find Device”

2) The connected device will be recognized and shown on left corner .

3) If the device cannot be found, follow the tips on screen and click ‘Yes’ to install driver.

4) Select DOLPHIN1 and install driver.

5) When the dolphin machine is found, click ‘Upgrade’

6) It takes a few minutes to complete upgrading. Please make sure the USB cable is always well connected when upgrading.

ww.vvdishop.com