Xhorse released new KD8ABAGL Toyota BA all keys lost adapter for 2021/2022- Toyota/Lexus key programming bypass security code.
IMMO type: 8A BA
Function: Add key and all keys lost bypass pin code
Compatible device: VVDI Key Tool Max Pro, FT Mini OBD Tool and Key tool Plus
*It cannot work with key tool max (or key tool max+ Mini OBD)
Compatible keys: Xhorse Toyota XM38 smart remote
Xhorse BA AKL Cable Vehicle List
Brand | Year | Board Number | P4 | Note |
Harrier | 2022- | 3041 | BA | / |
Venza | 2021- | 3041 | BA | / |
Sienna | 2021- | 3041 | BA | / |
Tundra | 2022 | 3041 | BA | / |
Levin | 2023- | / | BA | / |
Sequoia | 2023- | 3041 | BA | / |
Guangqi Venza | 2022- | 3041 | BA | / |
RAV4 Dual Engine E+ | 2021- | 3041 | BA | With A/C button |
GRANVIA | 2022- | 3041 | BA | / |
BZ4X | 2021- | 3041 | BA | / |
Land cruiser | 2022- | 2050 | BA | / |
Prius | 2023- | 3041 | BA | / |
Lexus NX | 2022- | 6100 | / | RF432 |
Lexus NX | 2023 | 6100 | / | 312-314 |
Lexus LX | 2022- | 0010 | / | RF432, new PCBA |
Connection wiring diagram
VW beetle 2010 all keys lost is done by xhorse vvdi key tool plus.
Read pin and cs via obd.
Learn key with just pin code.
Menu path: Select VW->Select by type->Learn Key->Automatically identify system
Xhorse Key tool plus identified as VW instrument 17 immo system-KWP1281
Press OK to proceed
Select Read PIN/CS (OBD) from engine
Read PIN and CS successfully.
Then perform learn key with just pin code.
Question:
I want to read engine ME9.7 ECU with xhorse vvdi key tool plus but the device does not show a wiring diagram. Where to find engine, gearbox and ISM wiring to key tool plus?
Here are some of the wiring diagram to key tool plus.
CR3.xx
CR4.xx
CR5
CR6
CR60.xx
CRD.11
CRD2.xx
ME9.7
MED17.7.x
7G Gearbox
ISM
SIM4LE
SIM4LKE
SIM266
SIM271DE2.0
SIM271KE2.0
Keep updating…
https://www.vvdishop.com/service/vvdi-key-tool-plus-benz-ecu-wiring-diagram.html
How to read Audi A6 J518 ELV MCU 3L40K with xhorse vvdi key tool plus?
Select Prog->IMMO->Audi->J518(-2010)(1L59W/3L40K)
Check wiring diagram
Connect J518 module with vvdi key tool plus mcu cable following the wiring diagram
Read and save eeprom
Read and save Flash data
Xhorse VVDI Key Tool Plus is able to repair VW Vento/ Polo NEC24C32 mileage by KM recalibration function without connecting to ECU. Following I’m gonna show how to do. The original mileage is 6532km on dashboard.
Connect Key Tool Plus, instrument panel & smart CAN solution tool all together.
IMMO programming >> European >> VW >> 4th immo system – Volkswagen/ Skoda/ Seat >> Instrument with NEC+24C32 >> Start programming >> Read instrument information
Here to check VAG number, HW/SW version and VIN on Key Tool Plus.
It’s better to backup immo data firstly before doing mileage correct.
Read immo data >> Login Method 2
*If the ignition key is inserted or when use the all-key-lost mode, there is the prompt to insert the ignition key, then you can select “Login Method 2” to try.
Here to check all immobilizer information, including 3 keys.
Press OK.
Whether to save the data? OK
KM Repair >> Yes >> Yes
Warning: KM recalibration only use for repair car KM after exchange new dashboard!
You can not use the function for other purpose, the user should take all risk if use in illeagal purpose.
Input new KM: 65330
Press OK to confirm.
As we can see, the mileage on dashboard has been changed to 6533km.
Reset success.