ابزار Xhorse VVDI
Xhose VVDI نرم افزار برنامه نویس اصلی و سخت افزارابزار Xhorse VVDI
Xhose VVDI نرم افزار برنامه نویس اصلی و سخت افزارXhorse Dolphin and VVDI2 make Audi HU66 All Keys Lost
Having been decode the HU66 bitting codes, today I wanna to use Xhorse Dolphin XP005 & VVDI2 to make 2 keys for Audi TT 1999 when all key lost.
Dolphin XP005 Cut Keys
Connect with XP005 machine in Xhorse app, press
Cut by bitting >> HU66 >> OK
Install M2-C clamp, fix one key blank flat on it.
Input key bitting codes, press
Cutting key >> Continue
Xhorse Dolphin machine stats cutting…
Repeat same operation for 2 key blanks, wait until finishing.
Install keys with a remote shell , let’s go to next step.
Xhorse VVDI2 Program Keys
Open VVDI2 software, click
Special Function >> K-Line Instrument /Immobox
Select type: Instrument Cluster – Magneti Mareli – Direct 2000-
Click “Read EEPROM”.
Start transfer/receive data…
Data was read out.
Magneti Marelli (without verify). KM start at address: 009C
The kilometers are right, so the PIN is 09551.
Go to “Key learn”.
Select vehicle: VAG KWP1281 Immobilizer – KWP1281
Input Key Count and Login(PIN), click “Learn”.
Please switch ignition OFF for 5s, then switch to ON. Click “OK”.
Test real value to channel…
Switch off ignition. Insert every key to ignition and switch on at least 2s. Click “OK”.
Completed!
Let me test the keys finally, alright, both can work well.
Key programming has done!
This is using Dolphin XP005 key cutting machine + VVDI2 programmer to make 2 keys for Audi TT 1999 all key lost successfully!
Dolphin XP005 Cut Volvo HU56 All keys lost
Hey everyone, today I got a door lock from a 2000 Volvo S40, so I’m gonna use the Xhorse Dolphin XP005 machine to cut a HU56 key for it.
I did decode it to get the bitting codes:21324343, and its lock code is DH0800.
I will use the Xhorse Key Tool Max to control it, you can also use Xhorse app on a smart phone instead.
Connect it with Dolphin XP-005 to start:
All key lost >> Volvo >> Input lock code: DH0800
Install M2-A clamp, and fix HU56 key blank as prompts, press “OK”.
Just to verify the bitting codes are all right, press
Cutting key >> Continue
Xhorse Dolphin will start cutting automatically…
Wait until the machine stopped, take out the key to cut the other side.
Go back to press on Key Tool Max,
Cutting key >> Continue
Dolphin XP005 will go on cutting…
Take out the key when machine was completed, it can open the lock flawless!
Done!
This is using Dolphin XP005 Key Cutting Machine to cut a HU56 door lock key for 2000 Volvo S40 all key lost successfully!
How to use Dolphin XP005 to Cut BMW HU92 Key?
Today I’m gonna show you guys how to use Xhorse Dolphin XP005 key cutting Machine to cut a HU92 BMW key. It is worked for a 2002 3 series BMW lock.
Here I had got the bitting codes: 11124344
I’ll use the Xhorse Key Tool Max to control the Dolphin XP005 machine.
Cut by bitting >> HU92R (depth 1.25mm)
It tells to use M2-2 clamp and tip align 2 position.
Fix the blank key on clamp flatly according to notes.
Go back to Key Tool Max,
OK >> Input the depth keyboard: 11124344 >> Cutting key >> Continue
Dolphin XP005 starts cutting key…
First side cutting finished, clean the scraps and flip it over.
Let’s start the other side cutting.
Repeat same operations as before:
OK >> Cutting key >> Continue
Dolphin XP-005 starts cutting key again…
Cutting key completed!
Clean the scraps and take out the key. It does perfectly open the lock.
HU92 BMW key cutting via Xhorse Dolphin key cutting machine auto machine successful!
How to use Dolphin XP005 to Cut BMW HU58 Key?
Hey everybody, I am here and ready to cut a HU58 key for a 1996 BMW 3 series lock. I will use the Xhorse Dolphin XP005 key cutting machine controlled by VVDI Key Tool Max to complete.
I have decoded the key bitting that A track is 23312, B track is 3441, and the lock number is BH130746. So let’s go ahead to xhorse app.
Cut by bitting >> HU58 >> Silca – HU58
It is said to use A clamp, press “OK” to continue.
Input the bitting code on 2 tracks.
Install the key flat on A clamp, fix and fasten it.
Press on Key Tool Max: Cutting key >> Continue
The Dolphin XP-005 starts cutting key…
First side cutting has finished, get all the scraps off there then flip it over. Install the key again to lock it flat.
Go back to Key Tool Max: Cutting key >> Continue
The Dolphin XP005 starts cutting the other side…
All right! Two sides cutting were done! Brush the scraps off, take out the key to have a test. It works perfectly!
Job has done!
This is BMW HU58 key cutting using a Xhorse VVDI Key Tool Max to run the Dolphin XP005 machine.
Customize Key Data for Xhorse Dolphin XP005?
When we need to cut some keys that cannot find in Xhorse Dolphin XP005 database, customize key data function maybe a good option to realize. This function is designed for experienced locksmiths.
Procedure
Go to Xhorse app, connect to Dolphin XP005 machine:
Customize key data >> Add mode >> Standard double sided
Enter relevant parameter, including alignment, key length, width. Press “Next” to continue.
Enter each position of key space, total 8 teeth will need to enter 8 positions. Press “Next” when finished.
Enter each position parameter of key flat, press “Next” when finished.
Enter the key depth number and relevant parameter, press “Next” to go on.
Enter coordinate number if have, press “Next” if do not have.
Enter all details, select clamp type and relevant key blank, press “Next”.
Confirm all key data, press “Save” to finish.
Customize key success.
Operation
Go back to main menu:
Customize key data >> Select customized mode
OK >> Enter depth keyboard of each position >> Cutting key >> Continue
Dolphin XP-005 starts cutting key…
Cutting key completed, let’s have a try, it does work.
This is a quick guide of how to customize key data for Dolphin XP005 Key Cutting Machine. It solves the frequent key cutting problem for locksmith who may meet, makes cutting keys easily.
https://www.vvdishop.com/service/customize-key-data-for-dolphin-xp005.html