Xhorse VVDI Prog Clone Opel Renault BCM N3 D70F3376A

 An Opel Movano 2016 body control unit BCM N3 had water damage earlier. We need to clone BCM to this unit with xhorse vvdi prog.

Found the connection diagram on google for this BCM.

Connect BCM with vvdi prog follow the wiring diagram

In VVDI Prog software, select MCU->Renesas-V850->D70F3376A

Read Dflash

Make sure you have backup config, d-flash and p-flash files.

Everything is in the flash. Write p-flash.

Open original p-flash

Write flash.

If failed to read D70F3376A processor, try solution here

Xhorse VVDI Prog Opel Movano BCM2 D70F3376A Try Frequency Failed Solution

Xhorse VVDI Prog Read VAG CRD310 Radio NEC and EEPROM

 How to read radio code unlock after reading Nec V850 D70F3358 Processor & 95128 Eeprom with xhorse vvdi prog for VW SKODA AUDI SEAT.

Part Number is 1z0035161f.  To decode this radio, you need two dumps, an eeprom dump and a processor dump. Preferably in BIN format.

Step 1: Read NEC V850 D70703358
Connect Nec V850 D70F3356 processor with vvdi prog via mcu3 adapter.
There is the wiring for Orange. You need to power the radio itself.

Orange5 pinout

VVDI Prog pinout

in vvdi prog wiring, i saw seven wires, in this connection diagram it only has 6 wires, but 6-wire is enough.

In vvdi prog software, select MCU-Renesas V850- D70F3358 and save data

Step 2: Read eeprom 92128

Connect 95128 mcu with vvdi prog via clip adapter.

With clip adapter you don’t need to unsolder the chip from the board.

Select EEPROM-ST-M95128

Read and save eeprom data

Upload NEC and eeprom data to radio code calculator, i.e this one.

Then calculate radio code.

Xhorse VVDI Prog Pinouts to Volvo S40 CEM

 VVDISHOP.com here shares Xhorse vvdi prog pinouts to volvo s40 CEM module.

There are 2 types.

Type 1 pinout

Type 2 Pinout

Feedback:

I was able to read and write both processors eeprom & flash with vvdi prog by following pinouts on mcu. I used hooks to connect straight to legs. The new installed bcm works great with old keys and no error codes are current.

Xhorse JLR XNDP16 KVM Adapter vs KVM Clip Adapter

There are two solder free adapters for land rover kvm modules. Is there a difference? Or is one better?

KVM Clip Adapter

Applied to programming the KVM Module for Land Rover and Jaguar  with SPC56 MCU
Connect to programmer such as VVDI PROG Directly no need soldering wire, very convenient.

It is suggested to use VVDI Prog KVM full erase read & write when reading & writing, If you choose to decrypt/read/write, you need to do a lot of wiring and disassembly of the Jaguar KVM hardware and it may cause KVM module damage.
It supports Land Rover after 2018 year.
Choose the type MCU SPC56xxxxxx from VVDI Prog software

Xhorse Land Rover KVM Adapter for VVDI Prog supported KVM Processors:

• Land Rover KVM Module with SPC56xxxxxx processor
• Range Rover KVM Module with SPC56xxxxxx processor
• Jaguar KVM Module with SPC56xxxxxx processor

Supported Models:

JAGUAR	ALL MODELS	2010	2019
LAND ROVER	ALL MODELS	2010	2019
RANGE ROVER	ALL MODELS	2010	2019
RANGE ROVER	EVOQUE	2012	2019
RANGE ROVER	SPORT	2010	2019
RANGE ROVER	VELAR	2017	2019
RANGE ROVER	VOGUE	2012	2019

Xhorse KVM XNDP16 adapter

It is compatible with both VVDI Key Tool plus, mini prog and vvdi prog (vvdi prog you will need DB25 to DB15 converter as well)

This XNDP16 adapter is for Land rover KVM 2015-2018.

How to Bind VVDI2 VVDI Prog to Xhorse App?

 Xhorse VAG MQB48 license requires your xhorse vvdi2 and vvdi prog registered to Xhorse account.

How to register and combine vvdi2/vvdi prog to Xhorse account?

The procedure can also be applied to vvdi mb tool.

First, use the Xhorse upgrade kit to identify vvdi2 or vvdi prog, click on the Binding in the upper right corner, and it will come up with a QR code.  

Then, find the cartoon character interface on the mobile APP, click on Account in the lower right corner, there is a “combind device”, click “combind device”, and scan the QR code for binding.

You can also check how many Xhorse devices you have combined here.

https://www.vvdishop.com/service/bind-vvdi2-vvdi-prog-to-xhorse-app.html