ابزار Xhorse VVDI
Xhose VVDI نرم افزار برنامه نویس اصلی و سخت افزارابزار Xhorse VVDI
Xhose VVDI نرم افزار برنامه نویس اصلی و سخت افزارHow to renew BMW PCF79xx Remote keys with VVDI Prog
This is how to renew 315 868 433 remotes to BMW E & F series, using Xhorse VVDI Prog and PCF79XX adapter version 2.
What do you need prepare for BMW remotes renew:
BMW remote (315MHz/433MHz/868MHz)
What kind of BMW remote VVDI-PROG supports:
BMW E SERIES
ORIGINAL 315 Need PCF79XX adapter
ORIGINAL 868 Need PCF79XX adapter
THIRD PARTY Need PCF79XX adapter
BMW F SERIES
315 REMOTE Need PCF79XX adapter
433 REMOTE Need PCF79XX adapter
868 REMOTE Need PCF79XX adapter
How to connect the BMW remote chipuse to PCF79XX adapter:
Put the chip in the IC socket
Desolder the original battery before writing the file
BMW-E-SEIRES-THIRD-PARTY-REMOTE-RENEW-CHIP: PCF7953/PCF7945
BMW-E-SEIRES-THIRD-PARTY-REMOTE-RENEW-IN-CIRCUIT
BMW-E-SEIRES-ORIGINAL-REMOTE-RENEW-CHIP: PCF7953/PCF7945
BMW-E-SEIRES-ORIGINAL-REMOTE-RENEW-IN-CIRCUIT
BMW-F-SEIRES-REMOTE-RENEW-CHIP: PCF7953
BMW-F-SEIRES-REMOTE-RENEW-IN-CIRCUIT
PCF7953/PCF7945 adapter version 2 required!!!!!!!!!!!!!
How to renew BMW remotes with VVDI Prog:
This is a BMW remote review from a customer who has good success.
I did renew 2 keys! Renew BMW series E 868 key – 100% OK using vvdi prog v4.6.0. Both worked and now are programmed to cars!
Only thing you need to disconnect from PCB is battery while writing the renew file.
I think that is only for those who have older version of that adapter. Older version came with 33 ohm resistor and later they decided that it is not needed and newer adapters like mine came with 0 ohm resistor that is just connecting both sides together without resistance.
If you have that 33 ohm resistor then remove it and short-connect it.
If you have 0 ohm resistor, then don’t mind that first box in connection diagram. It’s not for you.
I did it in circuit.
http://blog.vvdishop.com/vvdi-prog-v4-6-0-renew-pcf79xx-remotes/
Free download V4.6.0 XHorse VVDI Prog Programmer
VVDI-Prog v4.6.0 (2017-07-26)
* This version DON’t need update firmware
* Fix some bugs
+ Add VVDI PROG USER MUNUAL 4.6.0 version in Doc folder
* Change some RENESAS-V850 chips DFLASH size to 64KB
* Fix GM-BCM3 option
* Fix V850E2 series diagrams
* Change KESSY(2008–) diagram
(IMMO4 system) after 2008)
+ Add V850E-SK3H,V850-SJ3H series diagrams
+ Add NM93CS06, NM93CS46, NM93CS56, NM93CS66, FM93CS06, FM93CS46,FM93CS56,
FM93CS66 options in <1-EEPROM&FLASH>-><FAIRCHILD>
+ Add M93S06, M93S46, M93S56, M93S66, ST93CS46, ST93CS47, ST93CS56, ST93CS57,
ST93CS66, ST93CS67 options in <1-EEPROM&FLASH>-><ST>
+ Add D80(ADAPTER), D160(ADAPTER), M350803(ADAPTER), M350806(ADAPTER), M35080V6(ADAPTER),
M35080VP(ADAPTER) options in <1-EEPROM&FLASH>-><ST>(Need M35080/D80 ADAPTER)
+ Add MC9S12HN64_UNSECURED, MC9S12HZ64_UNSECURED, MC9S12HN64_SECURED,
MC9S12HZ64_SECURED options in <2-MCU>-><MOTOROLA-MC9S12>
+ Add ST72321(R/AR)6, ST72F321(R/AR)6, ST72321(R/AR/J)7, ST72F321(R/AR/J)7, ST72321(R/AR/J)9,
ST72F321(R/AR/J)9, ST72521B(R/AR)6, ST72F521(R/AR)6, ST72521B(M/R/AR)9, ST72F521(M/R/AR)9 options
in <2-MCU>-><ST-ST7>
+ Add SPC5606S option in <2-MCU>-><ST-SPC560XXXX>
+ Add ME7.5.20(ST10F275) option in <3-ECU>-><VOLKSWAGEN>
+ Add KESSY(2008–) option in <4-IMMOBILIZER>-><AUDI>
+ Add KEYLESS-ENTRY-MODULE(2009–)option in <4-IMMOBILIZER>-><GM>
+ Add HAVAL-H9-BCM(D70F3632) option in <4-IMMOBILIZER>-><GREATWALL>
+ Add BCM(2009–) option in <4-IMMOBILIZER>-><LANDROVER>
+ Add XINBAO(MC9S08LG16) option in <5-DASHBORAD>-><CHANGAN>
+ Add CRUZE(D70F3423) option in <5-DASHBORAD>-><CHEVROLET>
+ Add DASHBORAD(2013–)(SPC5604S), DASHBORAD(2013–)(SPC5606S), FIESTA(3L16Y),
FOCUS-C-MAX(2009) options in <5-DASHBORAD>-><FORD>
+ Add BESTURN-B70-SRS(D70F3623) option in <7-ARIBAG>-><FAW>
+ Add ACCORD-SRS(SPC56AP54L3) option in <7-ARIBAG>-><HONDA>
+ Add SRS-VW20(SPC560P50L3) option in <7-ARIBAG>-><VOLKSWAGEN>
+ Add A4L-LEW-MODULE(2013) option in <8-OTHER>-><AUDI>
+ Add EVOQUE-EPB-MODULE(2013) option in <8-OTHER>-><LANDROVER>
https://mega.nz/#!GoYhgIoS!Q13Sw-b6sDxld2mJSn5HunYYHZwg7EdXqF_xa3V_ecw
password:123456
How to Program Fiat Bravo 2008 Key by Xhorse VVDI2
An old Fiat Bravo 2008 have lost all keys. Most OBD key programmers can only program its remote, but cannot program chip key. Can only write start key.
Step 1: Remove BSI
Dissemble the BSI under the dashboard which is made by Magneti Marelli company.
Step 2: Write Key
Remove BSI and open it, locate 8-foot CPU, be careful to find chip 95160. You are required to read the CPU 95160 chip data.
Solder CPU 95160 chip and read data by ecu programmer, i.e VVDI Prog and save data
You can use Xhorse VVDI2 full or TM100 key programmer to write key. For example, you use VVDI2, upload 95160 data just read.
Select region:Europe,Fiat-Bravo,2009-95160, then you will see key number and position etc info.
Select unused key position, follow prompt to insert a brand new 7936 (ID46 chip) into VVDI2
Confirm Yes if VVDI2 ask you to generate dealer key.
Generate key success and generate new 95160 chip data. Write the new data back to 95160 cpu chip.
Re-solder the cpu and reinstall BSI.
Write key success.
Step 3:
Use other key programmer to program remote, i.e X300.
http://blog.vvdishop.com/tips-to-program-fiat-bravo-2008-all-keys-lost-by-vvdi2/