Xhorse VVDI2 key programmer released new software version V7.3.6 on March 31st, 2024.
*** 2024-03-31
*** Require firmware V7.3.5
************************************************************************
===== VAG V7.3.6 =====
1. Support MLB immobilizer key learning-Require VVDI-MLB TOOL
2. Support Fix dashboard data for MQB48-NEC35xx(Lock) type
3. Support Clone MQB48-NEC35xx(Lock) type dashboard (Copy CS/Component protection data from old data to new data)
4. Support Fix KM for MQB48-RH850 type-Require MultiPROG or KEY TOOL PLUS
5. Bugfix
===== BMW V7.3.6 =====
1. Bugfix
===== Porsche V7.3.6 =====
1. Bugfix
===== PSA V7.3.6 =====
1. Bugfix
===== Transponder Programmer V7.3.6 =====
1. Immobilizer data tool: Asia->China immobox->Simens immobox->93C56 add new type
2. Immobilizer data tool: Asia->Mzada->BT-50->95320 add 8C type
3. Immobilizer data tool: Asia->Honda->Bike(PCX/VARIO) display PIN code
4. Immobilizer data tool: Asia->Ducati->1199 Panigale->9S12 bugfix
5. Bugfix
===== Copy 48 (96 bits) V7.3.6 =====
1. Bugfix
===== J2534 V7.3.6 =====
1. Bugfix
===== Online Upate Tool V7.3.6 =====
1. Bugfix
===== Quick Start V7.3.6 =====
1. Bugfix
Free download VVDI2 V7.3.6 software
http://dl.xhorse.com/product/vvdi2/software/VVDI2-InstallerV736.exe
How to get the CS and PIN code of Volkswagen Skoda white meter petrol car without lifting the pin or cutting the track? Following we’re gonna to do it with Xhorse VVDI Key Tool Plus. In this way, we can read the meter data for mileage adjustment. If it’s not working, we can also read and write this data directly for any online programming or coding.
Connection
Immo programming >> VW >> Select by type >> 4th immo system – Volkswagen/Skoda/Seat >> Instrument with NEC35xx >> Star programming >> Instrument NEC35xx lock >> OK
*Make sure the Network connection is normal.
Programmer reads files >> Adapter method
Here we can see the connection diagram.
It requires the XDNP87GLSolder Free Adapter.
With it, you don’t need to lift any pins from MCU or cutting wires on adapter. You won’t take risk to damage it.
Connect the solder-free adapter to MQB48 dashboard.
After done, connect to VVDI Key Tool Plus& a 12V power.
Get CS & PIN Code
Read >> Continue
Reading success.
Save the data file.
Obtaining immo data >> OK >> Load the saved data
Reading immo data successfully.
Click “OK” to save.
Generate dealer key – Load immo data >> Load immo data file
As we can see, the CS & PIN codes have already been available.
In this way, you don’t need to pay for the third party for password.
Problem:
Failed to update xhorse multi prog firmware (Jump recovery error). The current firmware is 1.1.0. Also failed to sync device. Any solution?
Solution:
Press and hold the Reset button on the main unit before powering on, and hold it for 5 seconds after powering on. Try to force firmware upgrade.
If you cannot turn on Xhorse Condor XC-Mini, Condor XC Mini Plus or Condor II key cutting machine, you may need to test the 24v voltage output of the battery to check if needs a battery replacement.
Follow this way to test Xhorse Condor battery:
1.Remove these screws to take out the battery.
2.Connect 220V power supply on the top
Only when 220V power supply is plugged in at the top, you can measure 24V voltage output at the bottom. If you power the 220V but cannot measure 24V voltage, there is a problem with the battery or power supply. If there is no 24V voltage output, the battery does not charge and needs to be replaced.
2010 Ford Transit Mk7 all keys lost and active Cat1 factory alarm.
Key learning cannot be carried out by normal OBD operation with alarm active as key learning by OBD is blocked.
Removed BCM, read key data (chip MC9S12DG256) directly from the module using xhorse vvdi prog on the bench, added a new key on the bench with xhorse vvdi2, installed BCM back to the van, switch ignition on with registered key and alarm is deactivated.
Now we can erase all keys and add new all by OBD.