Xhorse Multi Prog Clear Peugeot 308 MED17.1 P0016 fault code

This is a tutorial on how to remove 2010 Peugeot 308(1.6 petrol engine) P0016 fault code with Xhorse Multi-Prog Programmer. The check engine was on the dashboard, and the fault code was red with a diagnostic tester. In addition, we also need ECU Soft Service for modification.

Step1. Read EEPROM & FLASH

It’s a Bosch ME7.4 controller for the experiment ECU.

Here’s the location to remove:

Pull out 4 plugs to conveniently remove the ECU.

Run Multi Prog software.

Device >> PEUGEOT >> 308 >> PSA BOSCH MED17.1 TC1766

Follow the diagram to connect controller via ECU adapter in bench mode.

Turn on power to read EEPROM & Flash data.

Then save all data files.

Step2. Modification by ECU Soft Service

Open ESS software,

Select vehicle model >> Open FLASH file >> Selected “Diagnostic Trouble Codes disable”>> Enter trouble codes: P0016 >> Remove

Save the new file.

Step3. Write Data

Go back to Multi-Prog software,

Open file >> Select the new file without fault code P0016 >> Save

Write the new file back to ECU.

Now there are no fault codes in the car anymore.

www.vvdishop.com