VW Golf 6 MK6 has a working key and need to add a new spare key using xhorse vvdi2 key programmer. Check instructions below.
Procedure:
Connect by obd2 on car.
Ignition is on with a working key.
Run VVDI2 software, select VW->Diag
VVDI2 detects instrument type TFT color display NEC 24C64 (-2012)
Read EEPROM/Flash->Read EEPROM
Switch on with the working key before press OK
Save eeprom data
Then Read Immo Data->Login Method 2
Read Immo data success and save data
Select Make Dealer Key and Login Method 2
Put new key into vvdi2 vag coil
Insert the dealer key into car and switch on for at least 2 seconds. The time for change key should less than 5 seconds.
Wait till appear 1-2 on cluster, then ignition on with second key.
Now 2-2, then ok
All keys were successfully learned.
Reset instrument.
Done.
www.vvdishop.com