Program Jeep Wrangler 2020 All Keys Lost with VVDI Key Tool Plus

Today we are going to make this Jeep Wrangler 2020 all keys lost with xhorse vvdi key tool plus. The vehicle has SGW gateway connector. Here is the connector. We use ADC2011 cable to program the key, it is easier than FCA 12+8 bypass cable.

If you can not access here, you come down here and remove that part, to access the connector under the instrument.

First of all, generate smart remote with km100 or xhorse key tool

Press IMMO PROGRAMMING

SELECT JEEP

SELECT BY AREA

SELECT NORTH AMERICAN

SELECT WANGLER

SELECT 2020-2021

SELECT YOUR SMART KEY SYSTEM

Press START PROGRAMMING

press ok

Turn on the hazard lights

Press READ PIN CODE

Press Accept and Accept

Don’t forget to be connected to the internet

now just wait 8-10 minutes to get the password

Don’t be scared if it failed to read pin, try several times.

it took 9 minutes to wait to get the password

press ok

Press CLEAR SMART KEYS

Press Accept and Accept

enter the password and press OK

after deleting all keys

Press ADD SMART KEY

Press Accept and Accept

enter the password and press OK

Press OK and place the key next to the button

will appear on the screen, press 1 x button

after pressing the button it goes from OFF to ACC

you will see 1 programmed key

press ok

press ok

Get out of the system

remove vvdi key tool plus

car started.

Done.

www.vvdishop.com