Read BMW CAS by VVDI Prog or Key Tool Plus with Solderless Adapter

 Since getting Xhorse Solder Free Adapters & XDPGSOGL DB15 Cable, I’ve found 2 new fast ways to read EEPROM & FLASH. These tools exactly help me a lot to save time from welding wires. Following I’m gonna show how to do with a BMW solder-free adapter.

1. Read via Solder Free Adapters + VVDI Key Tool Plus

Tools Required:

VVDI Key Tool Plus Pad

XDNP11GL CAS3/CAS3+ Adapter

Key Tool Plus Cable

CAS3 module

First of all, install the BMW adapter. Very easy, only to fix all positioning pins, then attach the adapter to CAS3.

Connect Key Tool Plus Pad & CAS3 adapter via cable.

Prog >> IMMO >> BMW >> CAS3+(0L15Y) >> Adapter >> Read >> EEPROM >> Begin >> Continue >> OK

Read & save successfully.

2. Read via Solder Free Adapters + VVDI PROG + DB15 Cable

Tools Required:

VVDI PROG

XDNP11GL CAS3/CAS3+ Adapter

XDPGSOGL DB25 DB15 Connector Cable

CAS3 module

Connect VVDI PROG & CAS3/3+ adapter via DB15 cable.

Open VVDI Prog software to select options:

Type: 4-IMMOBILIZER

Brand: BMW

Chip: CAS3+-0L15Y(ADAPTER)

Click “Read ID.

It’s IDC410.

It also reads EEPROM & FLASH successfully.

The VVDI PROG DB15 Cable that I bought from www.vvdishop.com is $29.99. It’s really good shipping that came from US warehouse. I’ll recommend the cable cause its good value for money. It allows another new way to work with VVDI Prog.

Which device is better at reading CAS3 without soldering?

Both devices read eeprom & dflash fast and successfully. VVDI Key Tool plus will also do a pin check.

This exactly help users a lot to save time from soldering wires.