Program BMW 320D 2006 CAS2 Remote with Xhorse Key Tool Plus

ow to use Xhorse VVDI Key Tool Plus to add a BMW 320D 2006 CAS2 remote key via OBD successfully in 2 minutes?

• Read & Save Data

Plug the connector into OBD2 port, press

Immo programming >> Europe >> BMW >> Automatically diagnose models >> Start programming >> Read key information

Insert the ignition key into ignition switch and connect the vehicle and device well.

Yes >> Yes

The dealer key should be taken away from ignition switch.

If key is keyless, please move it out of car.

If there’s no key in ignition, continue anyway.

Save >> Save here >> Rename, OK

• Program New Key

Prepare dealer key with programmer >> Select an enable key position:Key 10

Put the new key into VVDI Key Tool Plus programmer.

Is the current key the smart key? No

Key make okay and locked. Please use it to start the car.

If can not start engine, use “Add key” function add the dealer key to CAS system.

If key can start engine, but keyless not working, use “Repair Keyless Key” function.

• Test Key

Test the new key now, it can start the engine, and its remote is workable.

Key adding has done!

BMW 320D 2006 CAS2 remote key adding via Xhorse VVDI Key Tool Plus Pad is successful. Quite easy to be done in 2 minutes.

https://www.vvdishop.com/