Which tool can program VW Golf 7 key?

Confirmed: There is no tool on the market that can do MQB platform all key lost …..yet

only dealer + dealer key order

Works with working key only.

1. Since VVDI2 V6.1.0 Update:

Improvement for MQB prepare dealer key.

Support change MQB key ID (support GEKO online), require use VVDI proximity remote.

VW MQB add new type: Dashboard version 0555, 0556.

Support generate MQB proximity remote: require use VVDI proximity remote and download latest remote database.

How-to’s of

1. How to program Skoda Octavia 2015 MQB keyless go with VVDI2

2. How to program Seat Leon MQB remote key with VVDI2 VAG?

3. How to use VVDI2 to program new keys to VW MQB NEC35XX?

Source: http://www.vvdishop.com/

2. Abrites diagnostics for VAG: Works with working key only.

Key programming for vehicles based on the MQB platform from 2012 onwards. The VN009 special function will allow you to program keys to those vehicles if you have a working key. You can use new keys and keys previously programmed to the particular vehicle.

Supported models:

Audi A3/S3 2014+

Audi A3 8V (2012-2014)

Audi Q2

Seat IBIZA/ATECA/TOLEDO 06.2015+

Seat LEON 07.2014+

Seat LEON 3 5F (2012-2014)

Skoda RAPID 06.2015+

Skoda OCTAVIA 3 5E (2012-2014)

Skoda KODIAQ/SUPERB III

Skoda FABIA/OCTAVIA III 07.2014+

Volkswagen Crafter 2017+

Volkswagen Golf VII (2012-2014)

Volkswagen Golf 7/Polo/Tiguan II/Touran II 07.2014+

Volkswagen Passat B8

Please note: Vehicles with JCI clusters and virtual cockpits are not supported at the moment.

This special function requires an Abrites PROTAG Programmer, internet connection and an active AMS.

A new AVDI Interface or active AMS is required to purchase this special function.

Source: abrites.com

VVDI key tool failed to calculate 4d70 solution

Post starts with VVDI KEY TOOL issues and followed with solution, and finally solved.

I’m having issues here.

I could not calculate on line 4d70 on line I tried and tried and tried. So I deleted the app and reinstalled it and cannot remember my username for the life of me. I have tried everything possible. So with the link above complaints I’m having issues again. I can’t send an email because I’m getting the below wrong  vvdi key tool xhorse vvdi key tool

How to use vvdi super chip to copy Toyota 8A chip?

Xhorse VVDI Super Chip, released in 24/04/2019 with the update of VVDI2 v6.5.0, gets a lot of attention these days, here I’d share:

What does VVDI Super Chip look?

What is VVDI Super Chip for?

How to use VVDI Super Chip?

1. What does VVDI Super Chip look?

2. What is VVDI Super Chip for?

For the following chips programming:

chip 7935 33 40 41 42 43 44

chip 7930 46

chip 7930 47

chip 7930 4D chip on board

chip 7930 45 chip on board

chip 7937 46 chip on board

chip 7947 47 chip on board

chip 4D   60 63 70 80 83 82G 67

chip 4E 64

chip 4C

chip 8C

chip 8A Toyota H chip/Hyundai

chip 43 VAG/Honda

chip 8E Audi/Honda

chip T3 Buick model

chip T1/T2/T3

3. How to use VVDI Super Chip?

Used with VVDI2 v6.5.0 or newer version, VVDI KEY TOOL, VVDI MINI KEY TOOL.

How-to’s of VVDI Super Chip + VVDI2 copy Toyota 8A chip:

Put the original key into the coil of Handy Baby 2, it displays Toyota 8A chip.

Put the original key into the coil of VVDI2;

Put the new remote key (with Xhorse VVDI Super Chip ) into the coil of Handy Baby 2, it displays 8E chip.

Take out the VVDI Super Chip 8E chip.

Connect VVDI2 (with the original key in the coil) to the computer, starts to copy.

VVDI2 identifies the original key info:

Chip type: Tiris DST AES (8A).

Configuration parameter: Toyota H chip (128bit) – Corolla

Click on “Start to copy”.

1). Put the original key into the coil of VVDI2 to read out the key data.

2). Take out the original key from the coil of VVDI2 key programmer.

3) Put the remote key with the VVDI supper chip into the coil of VVDI2.

Writing into the data, it takes about 15 seconds.

4) Online password calculation ( It will deduct 200 bonus points per time for Toyota H chip generation)… Succeed.

5). Writing the data, please wait…

Copy successfully.

Again, put the Xhorse VVDI Super Chip into the Handy Baby 2, it reads out 8A chip.

Copy job is done.

www.vvdishop.com

Will VVDI2 do Audi A3 8P 2005 BKC cluster change?

Audi A3 8P 2005 BKC change cluster with VVDI2 OK? If not, how to do?

Question:

Audi A3 8P 2005 BKC, i want to change the cluster, but vvdi2 wouldn’t read the old IC.

Answer:

It’s 8P VDO dash with Fujitsu. VVDI does not support them. Read Immodata from ECU (CS, Login, MAC and immo id) get 7th byte from key and transfer to new dash.

Question:

Thanks your reply. I got all data what i need.
From ECU: CS 6 byte, PIN, MAC, VIN, ImmoID, powerclass
From keys: transponder ID and CS 7 byte
After transferred to the new dash, all ok on bench, no SAFE
Installed to the car, SAFE on dash.

I did a short video, no immo fault, strange

Answer:

If you disconnect ECU, does SAFE go away and you get mileage instead?
If so, I guess it is related to powerclass or MAC.

Upload your immoblock from dash and EDC16 eeprom dump or data.

ECU confdata and cluster immoblock here

ECU cluster:

https://mega.nz/#!FdJB0aRB!9xkkFJqrGDPlWalZxijPTkNny8b1fT6CPAeRt9M8jYo

Answer:

Your MAC is wrong:

971F1053 is correct one.
Status : 14000051FF is fine

Back to the car and test:

Finally, Works fine.

 

Credits to @exe123 and @ zolee33 from DK forum.

www.vvdishop.com

http://blog.vvdishop.com/audi-a3-8p-2005-bkc-change-cluster-with-vvdi2-ok/