VVDI MB Adapt Mercedes W207 2011 ESLwithout renew EIS

Here’s the guide to personalize Mercedes E-class W207 2011 ESL (key with BGA chip) using Xhorse VVDI MB Tool without renewing the EIS.  The process of calculating the password, reading the EIS data and programming ESL is performed by the VVDI MB.

Insert key into EIS
Open VVDI MB software

Select EIS Tools, Read EIS data and save it

Save HC05 format file as well
Go to Password Calculation
Tick lost all working key

Select Mode OBD and Chassis W172,204,207 (FAST)
Follow steps below to finish
1. Connect VVDI MB tool with MB power adapter and OBD cable
2. Connect IR adapter to VVDI-MB tool
3. Press Data acquisition
4. wait until 100% complete
5. Save acquisition data

This opeartin need about 18 minutes. Connect EIS with cable before continue
Don’t connect ESL to cable.

Press Upload Data, update eis data saved above

Success find key password

Copy the password
Untick if lost all working key and select IR mode
Select Chassis W172,204,207,212 (with ELV)

Step 1: Connect IR adapter to VVDI MB
Step 2: Data acquisition
1.Insert working key to ignition, wating 5 seconds
2.Take out working key, insert again, last insret to IR reader,
3.Data acquisition
4.Insert working key to ignitoon, waiting 30s,
5.Insert working key to device IR reader, wait end
6. Save acquisition data
Step 3: Press Upload Data to send acquisition data
Step 4: Press Query Result to get key password

Select ESL Tools

Select Load VVDI-MB EIS Data with key password

and paste key password to corresponding area

Connect EIS with Xhorse ESL emulator

Tick Auto clear TP and personalized
Press Write button
Writing data

Writing data success

Remove and insert key to EIS and repeat several times.

Done.

http://www.vvdishop.com/service/how-to-adapt-benz-w207-esl-using-vvdi-mb-tool-8070.html

Program W209 Kline Key with VVDI MB no removing

The great Update software version 5.8.0 from VVDI MB for Benz key programming released. Now 99% of cars mo need to remove anything. Disconnect ELV and just treat it as it were on bench.  Just use VVDI MB power adapter as normal like W204 /W208/W210.

Here’s the new feedback on Mercedes W209:

Trying out a w209. It’s on bench but simulating in vehicle. So far so good. password first read with vvdi mb tool, about 18 minutes.
When in car you just connect the blue alligator clip wire coming off the obd into the esl plug to grab the k line . Should be pin 5.

999 times payed calculation due to the yearly token unlimited plan

Thanks the feedback from Ms. EricRoss.

www.vvdishop.com

http://blog.vvdishop.com/vvdi-mb-read-w209-password-and-program-key-without-removing/

Program Benz W220 All Keys Lost using VVDI MB

How to: program Mercedes Benz W220 (OD69J) all keys lost using VVDI MB Tool and Orange 5 programmer.

Step 1: Read EZS data with Orange 5

Desolder OD69J chip from W220 EZS with heat gun

Solder OD69J chip to Orange5’s QFP64 adapter

Solder adapter to Orange 5

Read OD69J EZS data and save it

Step 2: Program W220 key with VVDI MB

Select EIS tool->Load EIS data

Load EZS data read by Orange5

Display key information

Select Prepare Key File

Load EIS file

Show key info

Untick v041 and v011, select Prepare Key File

Server calculating

Completed. Save key file.

Insert key into IR

Select Read Write Key->Identification key

Then Load key file

Write Key

VVDI MB BGA Tool Write W220 key success

Identify key information again.

Test the new key.

Working no issue.

Done.

www.vvdishop.com

http://www.vvdishop.com/service/program-benz-w220-all-keys-lost-with-vvdi-mb-tool-7066.html

How to program Benz ELV Simulator with VVDI MB Tool

The Benz W204 W207 W212 ELV simulator MB KEY OBD2 is designed to work for  all Mercedes C series, E series and GLK, including C180, C200, C280, E200, E260, E320 , E350, GLK200, GLK350 (from 2006 to 2014).
Chassis Number: W204, W207, W212

It can be programmed by MB key programmers, diagspeed, VVDI MB tool etc.

Note: The ELV simulator can be used on W204 W207 W212 chassis only when EIS not start.

It is can used on one EIS for one time only.

The indicator flashes for 2 seconds every time you insert key into EIS which means you have connected the  simulator correctly.

Here’s the programming procedure using VVDI MB:

Step 1:

1.Collect data
2.Save data
3.Calculate password online
4.Paste password to notepad

Step 2: Read EIS data

Step 3: Paste the key password here and save EIS data

Step 4:

1.Read EIS via IR

2. Erase EIS

Step 5:

EIS erased does not have VIN

Upload EIS data with password saved from step 3

Select OBD Write VIN

Select Write EIS via IR

Step 6:

1. Read EIS data

2. Personalize W204 ESL

3. Check the indicator on ELV simulator flashes for 2 seconds

Success.

http://www.vvdishop.com/wholesale/benz-w204-w207-w212-elv-simulator.html

Renew Mercedes W211 ECU CR3.xx with VVDI MB

How to use VVDI MB tool key programmer to renew Mercedes W211 ecu Cr3.xx?

Connect ECU with VVDI MB BAG Tool and CR3.xx adapter

Open VVDI MB software

Select Renew ECU/Gearbox

Read ECU information

Press Get button to calculate erase password online

Save the eeprom data

Click on Renew Button

Erase target unit success

Read ECU information again

VVDI MB BGA Tool Renew W211 ECU success.

http://www.vvdishop.com/

 http://blog.vvdishop.com/vvdi-mb-tool-renew-mercedes-w211-ecu-cr3-xx/