Problem:
I want to generate ID4A remote to a Niro 2023 using xhorse xm38 remote, but vvdi key tool max said this option does not support BMW motorcycle remote. What does it mean?
Solution:
You cannot use Xhorse XM38 motorcycle remote to generate this remote, you will need universal XM38 or Toyota XM38.
Problem:
I tried to generate Xhorse Toyota XM38 XSTO01EN smart key with vvdi key tool max.
It failed to generate remote to C-HR. And the led light stays on when the battery is installed
Solution:
Remove battery.
Long press ‘Lock’ button and then insert battery.
Wait for yellow light flash then release button to generate remote.
Question: Xhorse Toyota XM38 remote, cannot get TOY48 blank (i.e. 2012 Highlander or 2010 style Prius prox key) to insert into case. It only goes as far as photo. Is there a trick?
Here are tricks from customers:
1. Cut off the openings and shave off a bit at the root of the toy48 blade. Do both and it will be fine. Extra 10 min. Don’t cut your hand.
2. Shave off the inside of the case.
3. shorten blade to minimum length eg. the old one, then edit case
4.
Your putting in the wrong slot. If you move the key to the edge of case it will slide straight in.
5. Plastic tab on the inside, break tab, insert Toy48, get paid.
Problem:
What seems to be the problem. I can’t prepare xhorse xm38 toyota smart key, key tool max gave me error calculate failed Error 9B. I tried with different wifi, and nothing changed! Any solution?
Solution:
Your remote is Chinese (CN) version. Error 9B means version of your device does not match that of the remote.
The Chinese packaging XM38s can’t be used outside of CHINA.
Do buy a Global version of XM38 remote.
Here comes the customer feedback:
Programming spare to a North American 2015 RAV4 (8A keylessgo smart key), key immediately programs for all functions for remote and proximity, but trunk does not function on the xhorse xm38 smart key.
Generate key via this option.
RAV4(14-19) KeylessGo 8A 312.10-314.35
Problem with using Toyota Smart Key Settings for the smart access/smart start.
Use VVDI Smart Key Customization only, change Trunk setting to 0A, if you make the mistake of using Toyota Smart Key Customization, you need to regenerate the Toyota Smart Key protocol. Customize the Trunk button settings, erase keys from the vehicle and reprogram it. If not the remote function will be available but the proximity will not work.
Hope it helps.