Xhorse VVDI Key Tool Plus Audi Q3 2009- Add Key

 Here is the instruction on adding a spare key to Audi Q3 VDO 2009+ by xhorse vvdi key tool plus.

Main steps: 

Read immo data

Generate Dealer Key

Reset instrument

Learn Key

Step 1: Read Immo Data

Connect Key Tool Plus with OBD.

Turn ignition on, press

Immo programming >> Europe >> VW >> Automatically diagnose models >> Start programming

Detect instrument type VDO NEC 2009+ UDS

Select Read Immo data

Get the working key close to antenna

Switch on with working key before press OK. If car has keyless GO, put the working key nearby car coil and switch on.

Press “OK”.

Select  “Login method 1”.

Save immo data

Reset instrument to activate dash after operation finished

Put original key into xhorse key tool plus coil

Select Generate dealer key-load immo data

Upload immo data read above

Select Prepare normal dealer key

Place an unlocked ID48 chip/key into the coil

Make dealer key success

Reset instrument

Select Key Learn function

You should backup EEPROM and immo data before learn key

Select programming method: Program keys, get the login code from immo data to log in.

Put original key into igniton switch

Input number of keys to be learnt: 2

Upload immo data saved before

Place 1st key into the car sensing coil and don’t remove.

Learn 1st key

Place the 2nd key close to the antenna and wait

Learn 2nd key success