2017 BMW 330i B46 (MG1CS003) ISN failed to read with Yanhua ACDP, It is not G series, im508 reads it FEM system. Possible to read with xhorse vvdi prog and bosch adapter? Can’t find B46 under list.
Solution:
Try to read under B48 and B58 (Adapter). Check: Xhorse VVDI Prog Read BMW B48 B58 ISN Code Success
We have a customer who did it successfully (petrol model). Raise your voltage to 14.5 and read.
If edc17c50 is diesel, it can be done as well.
You can also get an optional BMW MG1/MD1 DME adapter on the aftermarket to make job easier. Operation images attached:
www.vvdishop.com
Here is the tip on learning a new transponder for a Renault Kangoo (2002-2007). The customer had lost all keys and now needed a new transponder.
Step 1: Read eeprom 93c56
Locate eeprom ic chip 93c56, desolder from ecu
Solder chip into eeprom adapter
Read and save data with ecu programmer (vvdi prog, orange5, upa etc)
Step 2: Write key via super chip
Go to xhorse vvdi2 Immo Data Tool, select Euro- Renault-Kangoo 1997- 93C46(56)
Insert a vvdi super chip into vvdi2 coil
Upload eeprom data read in step 1
Then make dealer key.
Prepare dealer key success. Now the key can start engine.
To successfully program Hyundai Creta(-2007) when all keys lost, all you need is only one tool – Xhorse VVDI MINI OBD Tool. It supports pin code reading & key programming via OBD.
Read Password
Insert VVDI MINI OBD Tool into OBD.
Connect to Xhorse App, go to
Immo programming >> Hyundai >> Read pin code >> Before 2007 model use(6 bit) >> Start execution
Please turn on the ignition switch.
Continue to test the password read currently? No
Operation completed.
Passwords have been read out successfully.
Key Learning
Immo programming >> Hyundai >> Select by type >> Key programming >> type4(CAN) >> Start execution >> Key programming
Please switch ignition off, then switch to ON.
Or click double flash button once to make sure the system is activated.
The number of learned keys: 1
Yes >> Input password >> Yes
Insert the wanted programming key and switch ignition to ON.
1 key learned successfully.
Press “Yes” to learn next one, press “No” to complete.
Test the new key.
It can normally start the car.
Done!
This is how to use VVDI MINI OBD to program Hyundai Creta(-2007) all keys lost. Working with VVDI Key Tool Max will achieve more functions.
Xhorse released a new XDPGSOGL DB25 DB15 Connector (no welding adapter) to connect vvdi prog with solder free adapters.
The adapter is used to connect vvdi-prog with Xhorse solder-free adapters, i.e XDNP11 BMW CAS3, XDNP12 BMW CAS4, DELPHI, J518 Adapter
For example:
If you read BMW CAS4 1L15Y via Adapter, vvdiprog will show you a connection diagram with the XDPGSOGL converter.
NOTE*
You cannot use Audi BCM2 adapter DB adapter with vvdi prog to read BMW CAS no soldering, otherwise, you will get an ‘adapter invalid’ error message.
I want to screenshot with the xhorse key tool plus. But I don’t find the function.