Program Peugeot 3008 2019 Key with VVDI Key Tool Plus

How-to:  read Pin code and program new smart key to a Peugeot 3008 2019 with Xhorse VVDI Key Tool Plus by steps.

Step 1: Read PIN Code

Go to IMMO Programming- Europe- Peugeot- Password reading – Type 3 CAN (adding)- Start programming- Read password

Make sure ignition switch is at off status
Switch the ignition off and wait for 5 seconds, then switch on, keep repeating this process

Read password success

Step 2: Add key

Go back to Peugeot menu, select by model-3008- with Smart- Start programming-  Smart keys programming

Turn on security warning lights

xhorse key tool plus will ask pin code to access, manually input pin

Place the smart key to be programmed into sensing coil under the slot side the glove box under start button or at the key sign at the bottom left of steering wheel

Progam success, continue to program next key

Put the new smart key to be programmed close to the start button

Program success.

Follow steps below to learn key

Place the smart key into induction coil

Turn the ignition switch to ON and turn off after waiting for 3s

Take aways the smart key and press LOCK button for 5 seconds

Remove smart key, turn on ignition switch for 3s, then turn off, press LOCK button for 5s.

Test remote control and start engine.

Done.

www.vvdishop.com