Program Chevrolet Colorado 2017 Key with VVDI key Tool Plus

have successfully read pin code and added a spare key to a Chevrolet Colorado 2017 with xhorse vvdi key tool plus pad. 

Go to Immo programming-Chevrolet-Colorado-Flip key program-Begin

Check key number

Turn on ignition switch

2 keys exists 

Press Add key

Close all doors, Turn on ignition switch

Keytool plus ask to enter 4-digit pin code to access

Programming in process, wait for about 10 minutes

Turn ignition off and remove key

Open then close the driver door, make sure all appliances are off

Insert a new key to be programmed, Turn on ignition switch

Program new key success

Turn ignition off and remove key

Open then close the driver door, make sure all appliances are off

Configuring system, perform ignition ONn and OFF for several times to sync key to the vehicle

Turn on ignition switch with the new key 

Turn ignition off 

Turn on ignition switch

Program key success.

Test the new key. It is working fine.

Done. 

www.vvdishop.com