Program Toyota 8A H chip all keys lost with vvdi

Xhorse newly introduced special function will read Toyota type H Immobilizer data via 8A adapter without having to dismantle the Immobilizer box.  Toyota 8A all keys lost operation procedure is finally available here.

Device required:

VVDI Toyota 8A adapter 

Xhorse VVDI2 or VVDI Key Tool Max + Mini OBD Tool

The whole operation steps:

1. Immobilizer Box off-line match

2. OBD match: without disassembling immobilizer box.

1). Disconnect the battery positive.

2) Locate the #2 ignition switch relay position and unplug the relay at the same time. 

3). Plug the vvdi device into the obd2 port of the Toyota car.

4). The connection of the VVDI2, Cable Vvdi Toyota 8A and the computer.

3. Put VVDI super chip into vvdi2 key programmer

Click on “Check Toyota 8A adapter”, then “Immobox (8A all key lost- OBD Make master key directly)”.

Read data

upload data

compute data.

The device completes automatically.

When the device prompts the completion of the operation, we also need to restore the vehicle and then start the vehicle for testing.

Done.

www.vvdishop.com

http://blog.vvdishop.com/vvdi-toyota-8a-h-chip-all-keys-lost-procedure/

Update VVDI Key Tool Max and Mini OBD Tool

Question: I received the xhorse vvdi mini OBD tool, impossible to update?

Answer:

Yes. Update is done via key tool max upgrade.

You need Xhorse Keytool Upgrade Kit.

Install it on your PC, make sure Internet-connected online.

>>connect white USB cable provided on Mini OBD Dongle to PC USB. Just follow on pop-up screen instruction. This stage do not switch ON your VVDI Key Tool Max.

The upgrade kit will Auto Detect your device and update to the next version.

IMPORTANT update firmware version in sequence do not jump to the latest Version number.

Do it step by step until you get the latest version.

Finished>>>Switch on your Key Tool Max and pair (Bluetooth) with Mini OBD Tool, and you get screen pop-up menu on Key Tool Max.

Note:

There are 3 ways for KEY TOOL MAX connect to MINI OBD TOOL: 1) USB TYPE-C Cable  2) WIFI  3) Bluetooth

www.vvdishop.com

VVDI Prog failed to Read Benz W203 EZS Solution

Question:

Did someone try to read Mercedes w203 ezs by wiring diagram?  I tried many times and fail vvdi prog show diagram from one side.
This is diagram all w203 the same but it’s only one side i saw a video on YouTube wiring in two sides by vvdiprog.

Vvdishop.com solution:
You need to compare the picture with your pcb and the mcu number.
If all same then this is your diagram.

You need to solder wires on other side also.
The diagram is correct on vvdi prog.
You need to choose the correct EIS type
W203 after 2003 all comes with w209 eis so don’t mix.

According what type of eeprom you choose
There is more that one w203 eis in vvdi-prog.
At the top rear side and down front side.

check other w203 EIS/EIZ wiring diagrams below:

Benz EIS-W203 1J35D/xJ74Y

Benz EIZ-W203 ST12 1L59W/3L40K/4L40K

Benz EIZ-W203/W211 HC12 0K50E 3K91D

W203 HC08 using EZS adapter

http://blog.vvdishop.com/read-mercedes-w203-ezs-with-vvdi-prog-correctly/

How to set Super Chip to TP23 to use on golf 5?

Question:

Why we cannot set super chip xt27 to TP23 with vvdi mini key tool. In menu i don’t have the option to set TP23.
Before this option was active,now its not possible ?

Answer:

Yes, you can set vvdi super chip to TP23.

Do not select Special Function, but go to Generate Transponder option and go to ID48.

Go to ID48 and then it will give you a choice as to which one you want, Audi, VW, Skoda, Seat

i.e  if you want TP23 chip to use on golf 5, select Golf 5 -> mini online clone , use normal id48 or super chip, no need for precoded, normal id48 chip = 1 euro.

but you can also set one chip Tp23 and program with other working programmers.

www.vvdishop.com

Xhorse VVDI Toyota 8A Adapter Questions and Answers

Q: Why we need this VVDI Toyota 8A adapter?

A: With this 8A AKL adapter, users can program Toyota 8A non-smart key ( on Levin, Corolla, RAV4, Parado, Land Cruiser, Camry, Highlander, Reiz, Sienna etc models) via OBD without disassembling immobilier box.

Q:Does this need a subscription for Toyota or is this a bypass..
A: Bypass.

Q: Does it support new 2020 Toyota keys?
A: Yes.

Q: Does a programmer of the degree need hello besides this adapter?

A: The adapter cannot be used alone. It should be work with vvdi2 or key tool max+ mini obd tool.
Q: Do you have instructions of the how to use (wiring diagram)?

A: Instructions and wiring diagram will be posted when it is for sale. Keep updating.
Q: Can it be used simultaneously with a barracuda?

A: No. Barracuda is a ecu programmer. The adapter require a OBD programmer to program key.

Q: Even without vvdi2 i can use it with mini obd tool?
A: The 8A adapter can be used with vvdi2, key tool max+ mini OBD tool.

Q: Toyota Aygo 2015 System H all keys lost. Does this kit program the chip?
A: Yes, it can.

Q: And what all do the Toyota 8A cable work on?
A: obd ready toyota for H type 8A could be 2019 or 2020

Q: Proximity or just keyed?
A: Not smart key. Just key.

Q: Possible to program smart key Land cruiser after 2016?
A: Yes, it will.

Q:Is possible to use Vvdi2 and VVDI key tool?
A: It can be used with vvdi2, but no vvdi key tool.

Q:How much for the whole kit (vvdi key tool max+ mini OBD tool + 8a adapter)
A: $697.

Keep updating…

www.vvdishop.com