Can VVDI Prog Read BMW ECU MSV80?

Question :

VVDI prog can read this ECU BMW MSV80? i want to clone ECU.

 

Solution:

You can’t clone msv80 with vvdi. Otp sector ISN. Read used DME ISN and write it to CAS.

Vvdi prog can’t read this ecu! VVDI2 & VVDI BMW yes, read isn via OBD /by ecu pinout. Then you can put ISN of DME to CAS.

IM608 and Autohex II will read the ISN as well.

www.vvdishop.com

VVDI Prog and UPA which is better?

Vote: Xhorse VVDI PROG or UPA USB PROGRAMMER for mcu and eeprom.

The result is most users recommend VVDI PROG.

In details…

@ volavka review:

VVDI Prog buy and enjoy.

@ wosanyn31 review:

Vvdi prog is very good, supported and easy to use, but had some problem writing some eeproms which I did read n’write nicely with clone orange5. I’ve only use orig upa to read motorola MCUs with clone’s adapters

@ ecuboost review:

VVDI PROG has a very good price compared to the competition (like all VVDI products). VVDI PROG does a lot of things, from CAS4 to copying eeprom in old ECUs. VVDI PROG doesn’t make many Motorola MCUs for this you need xprog or upa ( e.g. Mercedes ECU Bosch ME2.0 ).

for VVDIPROG buy an eeprom clip. Makes work a lot easier.

@ sindy review:

Vvdi-prog is very good.

@ dvdpgn review:

I highly recommend VVDI.

…..

And the topic is continuing.

One more question, where to have VVDI PROG?

There are not only one shop online who will sell you VVDI-PROG.

Therefore it is always nice to have a company recommended that someone has experience with.

This is the people I recommend: www.vvdishop.com.

How to Clone Smart Key with VVDI Key Tool Max?

How to copy/clone a smart key using VVDI Key Tool Max? Here takes an example of Kia ID46 smart key cloning.

You’ll need:

A original smart key

A Xhorse smart remote key

VVDI Key Tool Max

Put original smart key into key tool max’s induction area

Select Remote Clone->Transponder Clone->ID46 online calculation->->Copy proximity remote

*Online calculation requires network connection.

Insert original key into card slot and put Key Tool Max close to the Start button for data acquisition

Calculation success

Put Xhorse smart remote to the induction area

Clone smart key success

Remote control works

The new xhorse smart key can start vehicle

Done.

www.vvdishop.com

http://www.vvdishop.com/service/copy-smart-key-with-vvdi-key-tool-max.html

Important tip on clone smart key chip

Used VVDI MINI key tool to clone smart key chip Kia Sorento, get the following error message ” Error, is original key? If its aftermarket chip, please use aftermarket chip to clone”.

Xhorse chief engineer replied:

For smart key, please use vvdi mini key tool to generate remote first, then directly program the key. Don’t copy, otherwise you only copy the immobilizer chip and it can be only used for emergency start.

For example:

Program Hyundai Verna smart key with vvdi mini key tool

Step 1: generate smart key with vvdi mini key tool

Step 2: program remote with obdstar x100 pro.

www.vvdishop.com

Chrysler OCM 56043195AT mcu 3L40K pinout to VVDI Prog

Here’s the wiring pinout to Xhorse VVDI PROG programmer.

Chrysler Occupant Classification Module connection

MC9S12DG128_Secured

3L40K

Pic 2: Chrysler OCM 56043195AT mcu 3L40K

www.vvdishop.com