Xhorse Dolphin II Peugeot HU83 Error Code 2 Solution

 Problem:

I had a problem cutting Peugeot 207 HU83 key blade with new xhorse dolphin xp005l key cutting machine. Giving Error code 2 probes not detected.

Solution:

The clip key is in the wrong position.

Pay attention to the position of the clip key, not in the bottom groove.
If the key clip is in working position you will fail to cut key (usually get error code 2)

www.vvdishop.com

Chrysler CY24 key Cutting with Xhorse Dolphin XP005L

 If you have a problem cutting Chrysler CY24 key with Xhorse Dolphin XP005L key cutting machine, here’s tip.

Put the key in as far as you can and the machine will cut it. We do it on mine all the time.

never had to grind anything.
cy24 is probably the most common key to cut, never once had an issue with it not being far enough.
You have to ignore the instructions on the Dolphin II for the M5 clamp to cut it. You can’t line it up to the line it says.

Cut dozens of them no issues with dolphin 2 and m5 clamp. I’ve cut at least 20 of these no problem.You can also use the universal setting, tip align as far in as the key will sit on side A of the clamp.

Never has an issue with dolphin I with M1 clamp position neither.

Xhorse Dolphin XP005L Error Code 6 Solution

 If your Xhorse dolphin XP005L (Dolphin II) key cutting machine had error code 6.

Example 1: When doing height calibration, dolphin ii got error 6.

Example 2: Error 6 when trying to cut a toy 40 Blade the machine did decode the original but would not cut the blank. Using a 1.5 mm cutter and after full calibration it still would not cut.

If it is a new machine, follow the instructions here to check conductivity and milling probe.

How to Detect Xhorse Dolphin XP005 Probe and Cutter Conductivity?

If it is an old machine, do a conductivity test and send test video to xhorse engineer for analysis.

Tips to Cut Toyota TOY49 Key Blade with Xhorse Dolphin II

 YOU DO NOT NEED THE SHIM FOR THE Xhorse DOLPHIN XP-005L.

The new M5 clamp allows you to do it without it.
Cut By Bitting>TOY40>TOY 40 Remark: Emergency Key (One Sided Key)
You have to type the Bitting acquired by code. Choose between 4, 6 & 8 bitting

You can also do it under “Universal Duplication”, no issues at all

If you break probes when using the universal key dulpication function, it is usually user fault.

The probe works by electrical signal. when the metal probe touched the metal key an electrical signal is passed from probe to key, and the probe stops, if the probe does not stop and breaks then the electrical signal did NOT transfer from probe to key. CLEAN YOUR KEYS WITH A WIRE BRUSH!!!
You can put anything metal in the clamp and the probe will stop when it touches it. UNLESS ITS DIRTY!!
so clean the key with a wire brush every single time you decode a key, period!! A $2 wire brush will save u time, money, aggravation.
You need to Clean the probe too. they tend to get a little corrosion forming from moisture. so take care of the machine and you won’t have any issues.

How to Solve Xhorse Dolphin XP005L “Check Internet Error”?

How can I update my Xhorse Dolphin II XP005L key cutting machine? It keeps giving me the check internet error. Already tried 4 different internet and got nothing.

Solution:

Customers have tried following and working

1. Try with a PC with Windows 8 max, the upgrade kit didn’t work with windows 10 laptop.

2. I got it to work, I had to connect and disconnect my wifi connection a few times and update it.

Xhorse engineer solution:

Connect with a mobile hotspot and do an update.