Will VVDI Key Tool Plus do Renault Clio IV or Clio V

Will Xhorse vvdi key tool plus program Renault Clio V (i.e 2020 Clio 5) or Clio IV key? add key and all keys lost?

This is a frequently asked question.

No, Xhorse only does Renault Clio till year 2012. So it cannot do Clio 4/Clio 5 at present.

Xhorse released a groundbreaking update in 2024.  Xhorse VVDI Key Tool Max Pro received this update too.

The update is very good and tested working by many users.

We did 2014 Renault Master today with Xhorse Key Tool Plus. all keys lost. 30 second job. Easy.

One of our customers have completed the card smart key programming of Renault Talisman 2019 and Megane IV 2018 using new software patch and everything OK. It does not read the EEPROM. Seems safe and takes only about 3 minutes to make a dealer key and about 2 minutes to program keys in.

It does do some Renaults, but it does not support Clio V, Clio IV, Master 3, Duster PH3 etc.

Waiting for feature updates.

www.vvdishop.com

Xhorse XM38 Smart Key Tested on 2017 Ford Explorer 902Mhz

 User review:

Saved by xhorse universal remote again.

It is a 2017 Ford Explorer.  902mhz. FCC ID: M3N-A2C31243300

Using 902 Xhorse XM38 smart key.

Generate with xhorse and program by Autel IM508.

There is a way to change button configuration.  Hot function has menu for button config.

I changed the Panic for Remote Start on my Explorer.  You should stock those. Every popular.

This one was Xhorse XM38 smart key. Autel also has Ford style 902 smart key.

The difference is that Xhorse single remote can do 315mhz/902mhz. On Autel they are separate remotes. The L (315/433 MHz) and the H (868/902 MHz) versions.

Autels catalog is pretty limited, so less entries means less mistakes too. On the other hand, Xhorse only needs you to stock less keys, has a bigger coverage, and you have a feedback section where you read other users success/failures and any additional information they share.

www.vvdishop.com

How to Update Xhorse VVDI FBS3 Benz Smart Key

This is a guide on how to use Xhorse VVDI Key Tool Plus to update Mercedes-Benz FBS3 Smart Key without cutting the resistor off step by step. Also includes the procedure to set frequency and collect bonus points.

How to update MB FBS3 smart key?

Assemble the Benz FBS3 Key to put a battery in, then insert into Key Tool Plus.

Immo programming >> Benz >> Select from system >>Read write key >> VVDI BE key >> Start programming >> Upgrade VVDI BE smart key

Insert MB smart key into device IR coil and press OK!

Please select the version to be upgrade: 1.1.4

Press “Yes” to continue.

Update MB smart key to success!

How to set BE key frequency?

Set BE key frequency >> 315MHz

Set frequence success!

How to verify & collect BE key bonus points?

Click “Online verify BE key”.

Online check VVDI BE Key status, whether it contains bonus points or not. This function only verify, you can use upload points move BE key bonus points to your device.

Input VVDI BE key to device and press OK.

We can see this BE key has bonus points.

Click “Collect bonus points”.

Transfer VVDI BE key bonus points to your device. After upload success, the BE key will not contain bonus points.

Input VVDI BE key to device and press OK.

Success upload bonus points to your device!

Xhorse Condor Forget Lock Screen Password Solutions

 What to do if forget the lock screen password for Xhorse Condor Mini Plus/Condor II or Dolphin II key cutting machine?

There are several solutions:

1. The default passwords for the xhorse Condor key cutting machine include 000000, 111111, and 123456. Try them one by one.

2. If not working, connect xhorse condor/dolphin with laptop. Run Xhorse Upgrade Kit – recognize the device – “Repair” in the upper-right corner – repair internal errors 1-2 – clear all (step3 for about 3 times) – click “Upgrade” after 3 times of success. Then start key cutting machine.

3. If it is Dolphin XP005L, in Xhorse App, go to Device Info->Start password-> Close password.

If you forget password, uninstall APP then install again.

You can enter password to turn off the key cutting machine password.

How to Modify VVDI MLB Tool Firmware for MQB48 Adapter

 Xhorse VVDI MLB Tool updated MQB48 NEC35XX immo data collection function recently. Follow the steps below to update your VVDI MLB Tool firmware to use MQB48 adapter.

The MQB48 adapter comes with solder wires and an enhanced version replacement chip.

Remove 4 screws on the back of the MLB tool and open the shell.

Remove 2 screws on the main board and check out the other side.

This is the front of the main board.

Replace this chip using the enhanced replacement chip in the package.

After replacing the chip, reinstall the VVDI MLB Tool.

Then you can use the MQB48 adapter to collect immo data.

NOTE: Both the device and the adapter need to be connected to a power supply !!!