How to Use and Program Xhorse Digital Smart Key XSBTK0EN

 Say goodbye to fumbling for keys! The Xhorse Bluetooth Digital Smart Key turns your phone into a digital car key and smart diagnostic tool. Offering keyless entry, touchless locking, and remote start. No network? No problem! Plus, it’s super easy to install via OBD. Monitor your vehicle’s status and control it all from the SmartKey Box app(available on iOS & Android).

In this article, we’ll introduce how to start and use XSBTK0EN Smart Key, including full installation and activation. Upgrade your ride’s security and convenience today!

Step 1. Key Programming

NOTE: For vehicle security, this product requires the use of Xhorse professional equipment during the initial installation.

If you’re an automotive locksmith, make sure you have a battery and a pressing tool ready – tweezers are highly recommended for this process, and any Xhorse generation matching device.

If you’re an individual car owner, the first-time installation will require assistance from a professional automotive locksmith or repair shop to complete the process.

Here’s taking VVDI Key Tool Plus for demonstration.

• To start, carefully press and disassemble the device. Inside, you’ll find a built-in key.
• Be sure to install the battery correctly, paying close attention to the positive and negative terminals(with the correct polarity).
• Once the battery is installed, you can proceed to program it with the vehicle. As you would with a regular key.

It’s that simple! Now let’s dive into the operation steps using a BYD vehicle.

• Remote Program

Insert the Bluetooth Key Remote Module with the battery installed.

Remote Program >> BYD >> Han ID46/4A 433.92 >> Generate

Burn success.

• Detect Chip And Frequency

After generating, check the chip and frequency.

If successfully identified, proceed to the next step.

If the module is not recognized, it indicates that it is in a disabled state.

In this case, insert it back into the OBD port, pair it with the phone’s Bluetooth and use the phone to unlock the car once to activate.

• Immo Programming

Immo programming >> BYD >> 2021-(new) >> Smart key programming >> Start programming >> Key programming

Key number: 2

User the new smart key(Bluetooth Key Remote Module) and hold it close to the induction coil.

Programmed successfully.

• Test Functionality

Next, you can test the remote module.

Make sure it has the battery installed during the testing process.

If the test is successful, you’re all set!

Step 2. Bind The Device

Download and install the SmartKey Box app.

Note:

Programming completed, battery must be removed before using it.

Insert the device into the car’s OBD port, open the app and connect the device.

Then, pair the device with your phone through learning mode.

Step 3. Write OBD Diagnostic Program(Optional)

Enter “OBD diagnosis”, select the corresponding vehicle model and write the OBD diagnostic program to the device.

Note:

If your vehicle model is not currently listed in the supported models, it will not affect the functionality of your phone’s digital key. You simply won’t be able to access real-time vehicle and fault information. We are constanttly working to expand support and will provide updates as they become available.

Once you’ve completed these steps, the device is good to go!

www.vvdishop.com