How to Check 1 Year MB Tokens in VVDI Key Tool Plus?

One-year unlimited tokens for MB online password calculation now is available on Xhorse vvdi key tool plus. How to check 1 year MB tokens in key tool plus?

There are several ways to check your one-year MB tokens.

Way 1:
In Home menu, press user icon. 

Go to Combined Device.

Check Key Tool Plus Benz Paid tokens. 


Way 2:
Go to Immo programming –  Benz – Select from system – Password calculation – Start programming – Query Benz points






If you have 1 year mb tokens activated, you can see "You have 999 times for paid calculation".


Way 3:
You can also check MB tokens in Xhorse App (requires to combine Key tool plus with Xhorse App first).
Go to Account- Combine device
You will check tokens in your key tool plus device.

https://www.vvdishop.com/service/check-one-year-mb-tokens-in-vvdi-key-tool-plus.html

Tips to Program Audi A3 P8 Cluster Key by Xhorse VVDI2

 Question:

Having a few too many issues reading this Audi A3 P8 Micronas cluster on bench with Abrites + ZN060 Micronas cluster adapter. Maybe VVDI2 would be better? is it possible to wake up this cluster on bench with VVDI2?

Here is the clue.

A3 Micronas with blue connector is not possible with pogo pin to service mode and read immo data, you will need to service mode by eeprom.

A3 micronas cluster with blue connector has no support for reading immo data by ANY tool.

You will have to read EEPROM(24c64 from memory),write modified eeprom on bench, replace cluster in car, write back original by obd and then read immo data by OBD with a supporting tool. Xhorse VVDI2/VVDI Key Tool Plus can do this from start to finish.

There’s plenty of guides on how to do TP2 service mode by EEPROM online, but the xhorse tools mostly automate it, just feed the file in and write back the result file then continue to write back by obd/read immo data.

24c32 in this one.  People have done a few this way with Key tool plus and VVDI Prog. Better have the cluster on the bench and try to avoid connecting the cluster in the car and lose the ABS coding.

Feedback:

Well, did the needed… and now it works.

Pin 1 +12V (30)
Pin 4 GND (31)
Pin 5 +12V (15)

Pin 29 CAN H
Pin 30 CAN L

Connected in bench and VVDI 2 did it’s magic.

Abrites software is busted for OBD reading on 8P platform A3. It was reported to them several times and that was quite some time ago but they obviously don’t have any interest in fixing it. VVDI does the job for me.

www.vvdishop.com

Xhorse VVDI2 Small Screen Show Updating in Chinese?

 Problem:

Pulled Xhorse VVDI2 out of box this morning plugged it in and the small screen shows updating icon in Chinese. Any idea?

Possible reason:

You unplugged the USB cable before the upgrade was fully completed last time. So it shows in upgrade status.

Solution:

1.Update VVDI2 firmware via Xhorse Upgrade kit on laptop.

2. Change USB port or another laptop, try again. If all fails, the device may need a factory repair.

www.vvdishop.com

How to Add Audi A8 2018 BCM2 Key by Xhorse VVDI2

 It is an Audi A8 2018, and it’s a keyless one with a push-to-start key. We will walk you through the entire process using the Xhorse VVDI2 key programmer. From setup to completion, you’ll see all the steps needed to successfully create a copy of an advanced keyless system.

Tool used:

Xhorse VVDI2

Xhorse vvdi key tool max

Xhorse XM38 754J remote

Original Audi key

Step:

Generate remote

Read Immo data

Make dealer key

Learn key

Procedure:

1. Generate remote

Generate remote under 754D Prox 868 option using XM38 754J remote

Step 2: Read Immo data

Run VVDI2 software.

Select Key Learning-> 5th Immobilizer system
Then hit Read BCM2 Data (OBDII)

Save immo data

Step 3: Make dealer key

Press Make dealer key

Prepare normal dealer key

Select A6L, A7, A8, Touareg add key

Put original key into vvdi2 programmer.

Load BCM2 data read in step 2.

Make dealer key successfully.

Step 4: Learn key

Select Key Learning.

Follow VVDI2 prompts to learn both keys.

All keys have been learned.

www.vvdishop.com

Xhorse Multi Prog Peugeot PSA Valeo V56.12 Pinout

 Question:

I have to read a Citroen C3 1.2 Petrol ECU V56.12 but the wiring connection in Xhorse Multi Prog Boot Mode is missing.

Solution:

Multi Prog does PSA Valeo V56.x in boot mode only.

Here is the boot mode pinout.