How to clone 2021 Toyota Camry 8A Transponder using Xhorse vvdi key tool max.
It is a 2021 Toyota Camry we are going to go ahead and clone the customer’s key.
We’re going to go to transponder clone and reset transponder.
We have inserted a vvdi super chip in our key.
Make sure that you are connected to Wi-Fi hotspot or any type of Internet.
There’s our new key with our super chip inside there’s our customer program key.
Make sure that it’s pointing down okay and the chip is in a readable position.
Put the original key, take out the original car key, then we’re going to go ahead and put the super chip key in.
Detecting super chip, waiting just take out the key.
It’s calculating data. complete check it out. Key goes in emergency light stays off car turns on.
For the newer 8A transponder mobilizer chip Vehicles 2021 and over, you will require a password calculation from NASTF Techstream or a third-party.
You would have to read the set of codes that they send you and it’s three codes and you will send it to a third party they will calculate the password for you and send it to you when you’re adding a key.
If it is all keys lost, you will need to request two passwords to reset the ECU.
You need one password to reset ECU and then to add a key after the immo ECU is resetted that’s that’s another password.
So this immo system is kind of like a rolling code function where you read the three codes.
You send it to the person that’s going to calculate it for you he sends you the password and you go ahead and add a key or reset the ECU.
If you’re doing all keys lost you want to request two passwords so you read the codes with your with your programmer through the OBD.
You read the data and you send it to the third party and they send the password back. That’s how it works.
It’s like a rolling code function every time it gives you different data on there so you need to be on it precise and there then and there send him the data so he can
calculate your password for you and you’re able to add a key or reset the IMMO or ECU.
If you have the VVDI Key Tool Max you can now clone it and go aroud that function where you need NASTFA for techstream to program a key.
All you got to do is just clone it and then with your programmer you’re able to program the remote side.
There’s two parts you program the transponder and then you program the remote.
I usually clone the transponder and I’ll just program the remote with my programmer.
That’s how I go bypass the NASTF techstream function that I need to do.
How to generate 2018+ Toyota smart key using the xhorse vvdi key tool max and an xhorse XM38 universal smart key.
You will need the Toyota XM38 versions of their universal smart keys for this.
Make sure we do have a battery in the key.
Go ahead to Vehicle Remote and find Toyota.
Go down the list of all remotes to see if you can find the right FCC ID.
We have an option right there we see our FCC ID HYQ14FBA which should be the correct FCC ID for this vehicle.
We’ll take our remote with a battery in it. We’re going to insert the key on the antenna part of the key tool Max and then we’re going to hit Generate remote.
It’s programming the remote.
It’s putting me in a queue this is one of those you’ll have to have internet access for.
We’ll let it countdown now it’s generating the remote.
Generate remote successfully.
Many new Toyota keys cannot really be unlocked. Even refurbished ones that show up locked and unable to be programmed whereas these XM38 smart keys can be rewritten.
The reusability is a nice aspect of XM38.
Today we’re going to use the Xhorse VVDI Key Tool Max to clone a garage remote control. This garage remote to be cloned is brought from the client, which has 4 buttons. So next we’ll use a new Xhorse Masker Garage Remote to finish the cloning. I’ve separated its circuit board and battery on the table.
Click “Remote Clone” to check frequency, it shows 433.80Mhz.
HCS/Fixed Code Clone >> Garage key >> Start clone
Follow the prompts to press the original remote buttons in turn.
Once completed, it will show with confirm screen.
Connect Xhorse Garage Remote to Key Tool Max via cable.
Press “Clone”.
It will start cloning automatically…
Remote clone success.
Put a battery into the new garage remote to detect frequency.
As you can see, it’s same as the original one 433.80Mhz.
Let’s take out near the garage door, it can work and open the door.
Perfectly done!
Problem:
Xhorse vvdi key tool max failed failed to clone 4D70 from a Kia Rio 2023, Calculate failed, error code 10102 any solution?
Solution:
If it is an older Kia/Hyundai, it might be network issue.
Need must strong network connection for all cloning tool for 70-80bit.
But if it is 2020 onwards models, xhorse vvdi cannot clone 4D70 on Hyundai and Kia from around 2020 even its written that cloneable.
You need to get pin number from 3rd party as 99% that programmer won’t be able to read pin. Buy pin code and add key by OBD.
User feedback: 2021 Toyota Hilux 2gd-ftv all keys lost is done. Chip H 8A. Use xhorse vvdi key tool max, mini obd tool and 8a control box cable (bundle kit).
This is a Hilux made in Thailand and sold in Latin America.
I have done American and Japanese Rav4, Tacoma, Prado, Corolla Fortuner.
With the new immobox with fewer pins it can’t be done yet.
clear with the normal box 8H 8A is simple with akl kit, the new immobox can only be done with TIS techstream.
Images attached.