ابزار Xhorse VVDI
Xhose VVDI نرم افزار برنامه نویس اصلی و سخت افزارابزار Xhorse VVDI
Xhose VVDI نرم افزار برنامه نویس اصلی و سخت افزارHow to Solve Xhorse Multi Prog USB Device Not Recognized Problem
Problem:
Xhorse Multi prog was not detected by the Windows 7 system. It says USB device is not recognized. Any solution?
Solution:
If it is Windows 7 system, you should install driver for multi prog manually.
Follow guide here to install driver for Win7.
How to Install Xhorse Multi Prog Software Driver?
If Win10, it will automatically install driver.
How to Fix Xhorse Dolphin XP005 Error Code 87
Problem:
When turning on the Xhorse Dolphin XP005L key cutting machine it asks for an update. updated to 99% it says network error. the network is fine.It cannot charge battery only via power supply and also displays error code 87. Any solution?
Solution:
Unplug this green cable on the battery, then run an update. Plug the green cable after the upgrade is finished.
Program 2021 Volvo XC-90 Key with VVDI Key Tool Plus
It is a Volvo XC-90 2021. We need to add a spare key to it using Xhorse VVDI Key Tool Plus. We need to read CEM data first and program key.
Step 1: Read CEM data
Remove CEM module. Find chip 0N78S. Read this chip data.
Connect Xhorse Volvo CEM XDNP52 (MPC5748G) solde free adapter with CEM module and key tool plus.
Select IMMO Programming->Volvo->XC90->2015 onwards-> Smart key system
Read the CEM Data->Adapter method
Read and back up CEM data.
Step 2: Program Key
Select Add smart key
Load the CEM module data we read in step 1 to obtain 10-digit pin code
Turn Start knob to the right once then release.
Place original key into sensoring area (cup holder)
If programming failed, change the key in the sensoring area for different positions.
Program 1st key successfully.
Repeat the same step to program next key.
Read and Write Audi Air Suspension Control Unit by Xhorse VVDI Prog
Here is the Audi Air Suspension Control Unit.
It has 2 micro chips.
The first microcontroller.
The second microcontroller.
In general, there was a problem that at a speed of over 120 km/h, the air suspension dropped into an error for all 4 level sensors, when dropping below 120 km/h, all errors disappeared. It was decided to reflash the unit. It contains 2 Motorola microcontrollers. Xhorse VVDI Prog programmer can flash and read them.
General appearance
Connect module with vvdi prog.
Read and write Motorola MC912D60 secured chip.
Updated!
The firmware flash helped! There are no errors when increasing the speed. I was driving at 160 km/h and the car dropped to the first position.
How to Obtain Points for VVDI MLB Tool
Xhorse VVDI MLB Tool will program VVDI MLB key and original MLB key. It does not consume points when using VVDI MLB keys. But it does require 200 points when calculating data using the original MLB key.
Some customers asked how to get points for the MLB-Tool. Here is the clue.
Combine your VVDI MLB Tool with your Xhorse account in App first, the device will automatically deduct the points from the account when calculating online.
You don’t need to transfer points to the MLB-tool device. It will automatically deduct points from your account.
If your Xhorse account does not have any points, you can obtain points by generating brand new Xhorse universal remote keys.