How to Cut Fiat SIP22 Key using Xhorse Condor II

 Hey everyone, let’s walk through cutting a Fiat SIP22 blade using the Xhorse Key Cutting Machine – the Condor Mini Plus II. This key is used in most Fiats from around 2005 onward, so it’s something you’ll see often.

Step-by-Step Guide:

1. Select the Key Profile
   On the CondorII, go to:
   Automotive → Brand/model → Fiat → Fiat 500 → SIP22.

2. Clamp the Original Key
   Use the M5-B Clamp and align the key shoulder. Make sure it sits flat and secure.

3. Decode the Key
   Tap “Decode Key” on the screen. The machine reads the cuts-quick and accurate.

4. Load the Blank
   Insert your new SIP22 blankthe same way. Clamp it tight.

5. Cut the Key
   Hit “Start Cutting” with default settings. The machine does the rest. Brush off the swarf after-important for conductivity!

6. Flip and Repeat
   Turn the key over and cut the other side. Same process.

7. Test the Key
   Once cut and cleaned, test it in the vehicle. Works like a charm!

My Take on the Xhorse Condor II:
This machine is a game-changer. It’s fast, easy to use, and super reliable-perfect for automotive keys like the SIP22. If you’re a locksmith looking for a no-fuss, efficient cutter, I highly recommend it.

www.vvdishop.com

How to Cut Schlage Key Blank with Xhorse Dolphin XP005

 Question:

Can a SC1 blank be cut by numbers with the Xhorse dolphin xp005 key cutting machine? Have the M4 clamp. But I only have numbers to work with. No original keys.

Solution:

Yes, Xhorse Dolphin will cut SC1 household key blank by numbers.

The 10 depths are 0-9 for a sc1. On the dolphin you can’t use 0. This means that you must input all 1 digit higher…a 0 is inputted as a 1….1=2…so on…9=10
Input these screen shots under custom key data and this should work for you. Just when put key on m4 clamp, align shoulder to the clamp. Do not use the spacer.

Just search for depth and space charts and convert to mm if it’s in inches..and plug values in.

You can also buy the key profile or do it yourself. Like best keys, sch, kw, y11, y12, and some more.

How to Copy BMW X3 2022 Key with Xhorse Key Tool Plus

 User report:

Added a spare smart key to a 2022 BMW X3 using the Xhorse VVDI Key Tool Plus successfully.

BDC03 immo system.

Requires BMW BDC2/3 software license activation.

Copied an original key here.

Collect original key data via soldering method.

Then generate dealer key.

Program Yamaha ID49 All Smart Keys Lost with VVDI Key Tool Plus

 Xhorse VVDI Key Tool Plus program Yamaha motorcycle ID49 smart key 24LC02 immo box all keys lost successfully.

Step 1: Read PIN Code

Remove Immo box.

In key tool plus, go to Prog-Yamaha- Smart Card.

Check wiring diagram.

Connect device with immo box.

Read and save eeprom data.

Step 2: Write key

Go to IMMO Data Tool- Yamaha-Smart key (ID49)-24LC02.

Load eeprom saved in step 1.

Key tool plus will decode pin code.

Choose a key position and write key.

Xhorse key tool plus read it very well and gave the key code. It was very nice.

Xhorse Multi Prog Pinout to Benz Airbag A2059009727

 Xhorse Multi Prog read Mercedes C-class W205 airbag control unit A2059009727 successfully.

Part number: A2059009727

Processor: SPC560P50L3

Check the wiring diagram below.

In multiprog, select MCU-ST-SPC560 series- SPC560P50L3